Actiontec electronic PCMCIA manual Installing Driver Software, Windows 95a

Installing the	4
Driver Software

After installing the Modem, the drivers software must be loaded onto the computer. Select the operating system used, then follow the instructions.

Windows 95

There are two version of Windows 95: 95a and 95 OSR2. To discover which version is running on the computer, select Start, Settings, Control Panel, then double-click System. The version is displayed in the “General” tab. If the ver- sion is 4.00.950 or 4.00.950A, use the Windows 95a procedure. If the version is 4.00.950B, use the Windows 95 OSR2 procedure.

Windows 95a

To load the Modem’s software drivers onto a computer running Windows 95a:

1.Turn on the computer.

2.Insert the Modem into the computer’s PCMCIA slot.

3.When Windows detects the new hardware, the “New Hardware Found” window appears. Select Driver from disk provided by hardware manu- facturer, then click OK.

11