Transcend Information III manual Installing the Eisa, Adapter

2	INSTALLING THE EISA
	ADAPTER

This chapter describes how to install the 3C592 EISA adapter in your computer. An overview of these procedures is shown in Figure 2-1.

1

Inspect the adapter.

2

Install the boot PROM. (optional)

3

Insert the adapter.

4

Connect to the network.

5

Go to Chapter 3, “Configuring the Adapter.”

Figure 2-1 Hardware Installation Overview

After installing the adapter, you can load the network drivers, as described in Chapter 4. If necessary, you can change the software option default settings, as explained in Chapter 3.