Transcend Information III manual Loading Network, Drivers

4	LOADING NETWORK
	DRIVERS

This chapter describes how to load the network drivers required to let the 3C592 EISA adapter operate with your network operating system. Figure 4-1 shows an overview of these procedures.

1

Locate network drivers.

2

Access DOS.

3

Load the drivers.

A

NetWare

(Client/server)

B

Windows 95 Non-NetWare

(NDIS or other)

Figure 4-1 Overview of Loading Network Drivers

If you are running NetWare 2.x, 3.1x, or 4.x, you can use 3Com’s AutoLink auto installation feature, which automatically loads all the NetWare DOS ODI client software, including drivers. Follow the instructions in the section “Loading NetWare ODI Drivers.”

If you are running Windows 95, you must import the driver from the EtherDisk diskette. Follow the instructions in the section “Loading Windows 95 Drivers” later in this chapter.