Manuals / Transcend Information / Computer Equipment / Network Card

Transcend Information III manual One Adapter in a Server

Models: III

1 78

Download 78 pages 20.72 Kb

Page 41

4-10 CHAPTER 4: LOADING NETWORK DRIVERS

2Select Conﬁguration/Diagnostic/Troubleshooting, and press [Enter].

3Select Conﬁguration and Diagnostic Program and press [Enter].

4The next screen lists the installed adapters. Write down their slot numbers.

5Exit the program.

If you are using an ODI driver with multiple adapters already installed and you have not updated the NET.CFG ﬁle, specify which adapter you want the driver to recognize by adding the slot number to the NET.CFG ﬁle using the SLOT XXXX parameter, where XXXX is the slot number.

One Adapter in a Server

If you are running NetWare and have installed a single adapter in an EISA computer that is functioning as a server, follow the instructions in this section to load the NetWare 4.x server driver.

The 3C59X EtherDisk diskette contains a NetWare 4.x server driver (3C59X.LAN) and the NetWare Loadable Modules (NLMs) that enable the NetWare 4.x driver to be used with NetWare 3.11, 3.12, or 4.0x software. These ﬁles are found in the subdirectories in the \NETWARE subdirectory.

Driver Installation with NetWare

To load the 4.x server driver, follow these steps:

1Copy the contents of the appropriate \NETWARE\SERVER subdirectory to the boot partition of the server’s hard disk.

The 3C59X EtherDisk diskette contains the NetWare 4.x server driver and the NetWare Loadable Modules (NLMs) that enable the NetWare 4.x driver to be used with NetWare 3.11, 3.12, 4.0x, or 4.1 software.

Image 41

Transcend Information III manual One Adapter in a Server

Contents

Adapters 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Performing Troubleshooting and Diagnostic Tests Cispr B Compliance Figures Tables Introduction How to Use This GuideAbout this Guide Print autolink.log Conventions Introduction Features Optional Adapter Installing the Eisa Inserting the Adapter Installing the Boot PromInspecting the Adapter PCI and Eisa Bus Slots in an Eisa Computer List of devices appears, arranged by type Conﬁrming Adapter InstallationName of the installed 3Com adapter appears, as shown below Connecting to Thin Ethernet Cable Connecting to the NetworkConnecting to the On-board Transceiver Connecting to an External Transceiver Slide Latch Auto Select Media Type Adapter Conﬁguration Overview Configuring Conﬁguring the Adapter Using a NOS Other Than Windows Using Windows Software Option Settings Full Duplex Media TypeNetwork Driver Optimization Type at the prompt Changing the Settings I N N U Press Tab to highlight OK. Press Enter Continue this procedure with any of the other options Select Adapter Installed Adapters Drivers Loading Network Locating the Network Drivers Accessing DOS One Adapter in a Client Loading NetWare ODI Drivers AutoLink Requirements Alternatively, at the prompt, type At the prompt, type AutoLink Information Screen To print the ﬁle, type Multiple Adapters in a Client When the program has ﬁnished a Save the conﬁguration Main menu appears Reboot the computer Finding the Adapter’s Slot NumberRepeat a for the second adapter One Adapter in a Server For NetWare 3.12, 4.0x, or Multiple Adapters in a Server Finding the Adapter’s Port Address for Multiple Adapters Bind IPX to X NET=XXXX Bind IPX to Y NET=XXXX Click OK This imports the driver from the EtherDisk diskette Loading Windows 95 Drivers Ndis Drivers Loading Drivers in Non-NetWare Environments Additional Drivers Using Transcend PC Link SmartAgent Software Desktop Management Interface Troubleshooting Overview Performing Troubleshooting Diagnostic Tests Troubleshooting with the Diagnostic Tests Starting the Diagnostic Program Starting the Diagnostic Program Running the Group 1 Tests Assembling a Loopback Plug Running the Group 2 Test Running the Group 3 Test Setting Up an Echo Server Start the diagnostic program on the echo server Getting Help If a Test Fails If this test fails, try another loopback plug To change the test parameters, follow these steps Changing the Test Setup Link Beat LED Miscellaneous Checks Adapter Speciﬁcations Specifications AUI Connector Pin Assignments RJ-45 Connector Pin Assignments RG59 B/U 50 ohm Cable RequirementsFor unshielded twisted-pair UTP connections 100 ohm 3Com Bulletin Board Service On-line Technical ServicesAccess by Modem Technical Support World Wide Web Site 3ComFacts Automated Fax ServiceThreeComForum on CompuServe To use ThreeComForum Log on to CompuServe Local numbers are available within the following countries Support from Your Network Supplier To obtain an RMA number, call or fax Returning Products for Repair AUI cable Glossary Backplane BackboneBus Echo server Ethernet EMM386 Twisted-pair Numerics SymbolsIndex Eisa ﬁber-optic Windows 3.X 4-3 Windows 95 1-2, 3-3 Limited Warranty Santa Clara, CA 95052-8145 408 Interference Handbook CE Notice