10If you experience problems that occur only when using the AutoLink program, display or print the AUTOLINK.LOG file. The AUTOLINK.LOG file contains a log of all the events that occurred during the AutoLink installation and configuration process.
aTo display the file, type:
type autolink.log more
bTo print the file, type:
print autolink.log
Changing the Test Setup
To change the test parameters, follow these steps:
1Choose Test Setup from the Test menu in the main window of the Configuration and Diagnostic Program, or choose the Test Setup button in the Run Tests dialog box.
2Press [Tab] to highlight any of the fields within the Test Setup dialog box.
3To change a setting in any field, follow these steps:
a In the Group Select box, use the arrow keys to select a test group.
For more information on the Group 2 or Group 3 tests, refer to the appropriate sections earlier in this chapter.
b In the Group X Tests box, use the arrow keys to highlight a test. Press the [Space Bar] to enable or disable an individual test.
c In the Repetitions box, specify the number of times you want to run the tests, or use the arrow keys to select the Continuous option.
d In the Errors box, press the [Space Bar] to select or deselect the Halt on Error parameter.
4When you are satisfied with the new test setup, select the OK button and press [Enter].
