Transcend Information III manual Loading NetWare ODI Drivers, One Adapter in a Client

Loading NetWare ODI Drivers 4-3

Table 4-1 Accessing DOS

Operating System	Procedure
OS/2	1	Boot your computer from a plain DOS diskette.
	2	Type install at the DOS command prompt to
		run the 3Com install program.
Windows 3.x	1	Exit Windows completely (select File, Exit
		Windows, OK).
	2	Type install at the DOS command prompt to
		run the 3Com install program.
Windows 95	1	Turn on your computer.
	2	Press [F4] as soon as you see this message:
		Starting Windows 95
	3	Type install at the DOS command prompt to
		run the 3Com install program.

Loading NetWare ODI Drivers

This section describes the following conditions under which you can use NetWare drivers:

■One adapter in a client

■Multiple adapters in a client

■One adapter in a server

■Multiple adapters in a server

One Adapter in a Client

To load the driver for a single adapter in a NetWare DOS ODI environment, follow the instructions in this section. The 3Com DOS ODI driver is 3C59X.COM.

3Com’s AutoLink auto installation software automatically installs all necessary NetWare DOS ODI client software, including drivers. The software also modifies the CONFIG.SYS and AUTOEXEC.BAT files. It automatically logs on to the server and updates the client software if your system administrator has already configured a 3Install account on your server. Instructions for configuring a 3Install account are