ESC=Cancel
3Com's auto installation software (AutoLink) automatically configures your adapter and workstation for use as a NetWare client. To use AutoLink:
*Have only one 3Com Bus Master adapter installed
*Use NetWare v2.X, v3.1X, or v4.X as your network operating system
*Have DOS on the client being installed
AutoLink edits your AUTOEXEC.BAT and CONFIG.SYS files and saves the old versions. Select General Information/Release Notes in the main menu for information on AutoLink server support. To manually set up your adapter or for information/drivers for other NOSs, use the options under Standard
Installation and Configuration in the main menu. This option will install a complete DOS ODI client.
(C) Copyright 1995, 3Com Corporation. All Rights Reserved
[ENTER]=Continue [ESC]=Exit Program
Figure 4-2 AutoLink Information Screen
ESC=Cancel | F1=Help |
M A I N | M E N U |
Auto Installation with Configuration (AutoLink)
NetWare DOS ODI Client
Standard Installation and Configuration
Network Drivers ...
Configuration/Diagnostic/Troubleshooting ...
General Information/Release Notes
Program & information for configuring/testing/troubleshooting adapters
(C) Copyright 1995, 3Com Corporation. All Rights Reserved
[ENTER]=Execute Function [−↓]=Scroll
[F1]=Help [ESC]=<Cancel>
