Actiontec electronic GEU404000-01 user manual DSL Settings, Restore Default Settings

Page 45

Actiontec Wireless Ready DSL Router User Manual

DSL Settings

To access DSL Settings, select DSL Settings from the “Utilities” screen. The Router’s VPI, VCI, and Mode settings can be changed from this screen. Actiontec recom- mends not changing these values without consulting the ISP.

Restore Default Settings

To restore the Router to its factory default settings, select Restore Default Settings from the “Utilities” screen. When the “Restore Default Settings” screen appears, click Restore Default Settings. Any changes made to the Router’s settings in the Custom Setup screens will be lost and the factory default settings will be restored. During this process, the Router’s power LED flashes and the Router is disabled.

Warning: Do not unplug the power cord from the Router dur- ing the Restore Default Settings process. Doing so may result in permanent damage to the Router.

When the Power LED stops flashing and glows steadily green, the Router is fully operational.

42

Image 45

Contents Wireless-Ready Cable DSL Router Table of Contents Page Minimum System Requirements Package ContentsFront Panel Router FeaturesLAN LED Red Port Modem Ethernet Technical Support Reset ButtonPage Initial Set Up and Plugging in the Power Cord Connecting a Computer to the RouterPage Setting Up the Router Page Setting Up the Router Page Connecting to the Modem Connecting via Ethernet Recommended Connecting to a ComputerSetting Up the Router Page Setting Up the Router Connecting via USB Setting Up the Router Page Connecting via Ethernet Connecting Additional ComputersPage Setting Up the Router Page Connecting via USB Page Setting Up the Router Page Connecting Wirelessly Page Setting Up the Router Page Accessing Custom Settings Using Custom SetupWireless Settings Wireless Equivalent PrivacyChannel Off Dhcp Server Dhcp Server Configuration Advanced Port Forwarding Settings VPN Pass ThroughPort Forwarding DMZ Hosting Status Web Activity Log Using UtilitiesRestore Default Settings DSL SettingsUpgrade Firmware Page Troubleshooting Time out error occurs when entering a URL or IP Address Windows 98 and 98 SE Setting Up Static IP AddressPage Do not include the periods they are automatically entered Windows Me Appendix a Setting Up Static IP Address Do not include the periods they are automatically entered Windows Page Appendix a Setting Up Static IP Address Do not include the periods they are automatically entered Windows XP Page Appendix a Setting Up Static IP Address Page 198.162.0.2 Page General Certifications Wireless Operating RangeEnvironmental Page Glossary IP Internet Protocol Address Ssid Page Class B Equipment Regulatory Compliance NoticesModifications Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty