Patch | 33 |
■software release
The Rapier16fi requires the
The 2.5.3 software release for Rapier16fi switches will resolve this port map issue.
This section should be read in conjunction with the following document:
■Rapier Switch Documentation Set for Software Release 2.5.1 available on the Documentation and Tools
How to check that the port map is correct
The ifIndex and Interface fields in the SHOW INTERFACE command show the port map settings. ifIndex shows the index of the interface in the interface table, and Interface shows the physical or logical interface that maps to the index entry.
A correct port map
If the
Figure 1: Example output from the SHOW INTERFACE command with 86251-04.paz installed
Interfaces |
| sysUpTime: | 00:00:09 |
DynamicLinkTraps | Disabled |
|
|
TrapLimit | 20 |
|
|
Number of unencrypted | PPP/FR links | 0 |
|
ifIndex Interface | ifAdminStatus | ifOperStatus | ifLastChange |
1 | port9 | Up | Down | 00:00:00 |
2 | port10 | Up | Down | 00:00:00 |
3 | port11 | Up | Down | 00:00:00 |
4 | port12 | Up | Down | 00:00:00 |
5 | port13 | Up | Down | 00:00:00 |
6 | port14 | Up | Down | 00:00:00 |
7 | port15 | Up | Down | 00:00:00 |
8 | port16 | Up | Down | 00:00:00 |
9 | port1 | Up | Down | 00:00:00 |
10 | port2 | Up | Down | 00:00:00 |
11 | port3 | Up | Down | 00:00:00 |
12 | port4 | Up | Down | 00:00:00 |
13 | port5 | Up | Down | 00:00:00 |
14 | port6 | Up | Down | 00:00:00 |
15 | port7 | Up | Down | 00:00:00 |
16 | port8 | Up | Down | 00:00:00 |
17 | vlan1 | Up | Down | 00:00:00 |
Patch