Allied Telesis AT-AR236E manual Management Support

Page 4

Management Support

•Web Based HTTP management GUI

•TFTP/FTP Support for Firmware Upgrade

•Web Based Firmware Upgrade (Local)

•Soft Factory Reset Button via Web GUI

•Diagnostic Test (DSL, OAM, Network, Ping Test)

•Telnet/CLI (Read Only)

•Syslog Support

Security Support

•NAT for basic Firewall support

•Packet Filtering Firewall Support

•Stateful Packet Inspection Support

•Protection against Denial of Service attacks

•Password Authentication to Modem

External Connectors:

•1 x RJ-11 Telephone socket for ADSL line

•1 x RJ45 for 10/100Base-T Ethernet (MDI-X)

•1 x USB 1.1 Type B

•1 x DC Jack for Power Input

•1 x Factory Default Reset Button

- 4 -

Image 4

Contents Web Interface User’s Guide Wide Area Network connection Local Area Network connection Features IntroductionManagement Support Ports and buttons Your gateway at a glanceLED description Installing your Adsl Router Setting up your Adsl Router Log into your Adsl RouterQuick Start Quick StartWide Area Network connection Setup for advance userLocal Area Network connection New Connection Configuring the WANBridged gateway profile and Connection PPPoA Connection Setup Page PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modem setup Modify an Existing ConnectionConfiguring the LAN Enable/Disable DhcpChanging the Adsl Router IP address Static IP address assignmentFirewall/NAT Services Advanced for advance user only UPnPPort Forwarding DMZ configuration Advanced SecurityAccess Control Enable Web from WANEnable Remote Telnet Enable Incoming Icmp PingMAC Address Filters MAC FiltersMulticast MulticastStatic Routing Dynamic Routing Tools System CommandsUser Management Update Firmware Ping Test Modem TestStatus System Log Adsl Router is not functional Appendix a TroubleshootingCan’t connect to the Adsl Router DSL Link LED continues to blink but does not go solid DSL Link LED is always offWhat is a firewall? Adsl Router terms