Allied Telesis AT-AR236E manual Advanced for advance user only, UPnP

Page 21

4.6Advanced (for advance user only)

The ADSL Router supports a host of advanced features. For basic ADSL Router functionality, the user does not need to utilize these advanced features. The features help with routing, security, port configuration, and plug and play capability.

4.6.1 UPnP

UPnP NAT and Firewall Traversal allow traffic to pass-thru the ADSL Router for applications using the UPnP protocol. This feature requires one active DSL connection. In presence of multiple DSL connections, select the one over which the incoming traffic will be present, for example the default Internet connection.

To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is configured, click Advanced and under Advanced, select UPnP. This will bring up the screen shown in Figure 13. You must enable UPnP and then select which connection will utilize UPnP. In this case the PPPoA connection is enabled.

Figure 13 (Management IP address)

The apply button will temporarily save this connection. To make the change permanent you need to click on Save Settings (at the side of the page). At the system commands page, click on Save All.

- 21 -

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Web Interface User’s Guide Wide Area Network connection Local Area Network connection Introduction FeaturesManagement Support Your gateway at a glance Ports and buttonsLED description Installing your Adsl Router Log into your Adsl Router Setting up your Adsl RouterQuick Start Quick StartSetup for advance user Wide Area Network connectionLocal Area Network connection Configuring the WAN New ConnectionBridged gateway profile and Connection PPPoA Connection Setup Page PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modify an Existing Connection Modem setupEnable/Disable Dhcp Configuring the LANStatic IP address assignment Changing the Adsl Router IP addressFirewall/NAT Services UPnP Advanced for advance user onlyPort Forwarding Advanced Security DMZ configurationEnable Web from WAN Access ControlEnable Remote Telnet Enable Incoming Icmp PingMAC Filters MAC Address FiltersMulticast MulticastStatic Routing Dynamic Routing System Commands ToolsUser Management Update Firmware Modem Test Ping TestStatus System Log Appendix a Troubleshooting Adsl Router is not functionalCan’t connect to the Adsl Router DSL Link LED is always off DSL Link LED continues to blink but does not go solidAdsl Router terms What is a firewall?
Top Page Image Contents