Allied Telesis AT-AR236E manual Quick Start

Page 8

4.2Quick Start

The first screen (Figure 2) that appears (after the log in screen) is the Quick Start screen. Depending on the country that you reside in, some profiles had been preset for the VPI/VCI and type of encapsulation. For example, if you reside in New Zealand, click on the button for New Zealand and then click Next. The next screen will display the preset profile of VPI=0, VCI=100 and encapsulation type is PPPoA VC-MUX. If this is not correct, select Customise Settings and enter the VPI and VCI settings. If the DSL service is PPPoA or PPPoE, you will also need to enter the username and password which your DSL provider or ISP will supply to you.

The Quick Start page is meant for basic users who only require easy and seamless connectivity to the internet without worrying about any other advance configuration setting.

For more advanced setup, please proceed to the next section.

Important:

After clicking on Connect, please be sure to “Save Settings” to register the username / password or any other changes.

Figure 2 (Quick Start page)

- 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Web Interface User’s Guide Wide Area Network connection Local Area Network connection Features IntroductionManagement Support LED description Your gateway at a glancePorts and buttons Installing your Adsl Router Setting up your Adsl Router Log into your Adsl RouterQuick Start Quick StartLocal Area Network connection Setup for advance userWide Area Network connection Bridged gateway profile and Connection Configuring the WANNew Connection PPPoA Connection Setup Page PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modem setup Modify an Existing ConnectionConfiguring the LAN Enable/Disable DhcpChanging the Adsl Router IP address Static IP address assignmentFirewall/NAT Services Advanced for advance user only UPnPPort Forwarding DMZ configuration Advanced SecurityAccess Control Enable Web from WANEnable Remote Telnet Enable Incoming Icmp PingMAC Address Filters MAC FiltersMulticast MulticastStatic Routing Dynamic Routing User Management System CommandsTools Update Firmware Ping Test Modem TestStatus System Log Can’t connect to the Adsl Router Appendix a TroubleshootingAdsl Router is not functional DSL Link LED continues to blink but does not go solid DSL Link LED is always offWhat is a firewall? Adsl Router terms
Top Page Image Contents