3Com 32x, 52x Required Information Specification, DN must be set as follows Parameter Setting

North American Switch Provisioning Tables A-5

AT&T 5ESS Custom To order ISDN service for an AT&T 5ESS custom switch, provide the

Switch telephone company with the information in Table A-2.

Table A-2Ordering ISDN Service for an AT&T 5ESS Custom Switch

Required Information	Specification
Line type	ISDN line with point-to-point configuration
Line code	2B1Q (2B+D)
Interface type	S/T interface with NT1 and RJ-45 jack
Maximum terminals (MAXTERM)	1
Maximum B channels (MAXB CHNL)	2
Circuit-switched data (CSD)	2
Circuit-switched data channel (CSD	Any
CHL)
Terminal type (TERMTYP)	A-Basic or E-Type (data only) Terminal
Display	No
Voice or data	Data
Call appearance preference	Idle
DN must be set as follows:
Parameter	Setting
B1	Circuit-switched data
B2	Circuit-switched data
D	Signaling only
ACT USR	Yes
TERMTYP	TYPEA or TYPEE
CSD Limit	2
CA PREF	1

A point-to-point configuration on a SuperStack II bridge/router or boundary router is selected by setting the SPIDn1 and SPIDn2 parameters to none.