
DMS 100 and To order ISDN service for a DMS 100 or National ISDN switch, provide National ISDN the telephone company with the information in Table
Table A-3 Ordering ISDN Service for a DMS 100 Switch
Required Information | Specification |
|
|
Line type | DMS 100 or National ISDN 1line (in North |
| America) |
Line code | 2B1Q (2B+D) |
Interface type | S/T interface with NT1 and |
Yes | |
Bearer Restriction option | No packet mode data (NOPMD) |
Protocol | Functional version 0 (PVC 0) for DMS 100 |
| Functional version 2 (PVC 2) for National ISDN |
SPID suffix | 1 in North America only |
Terminal endpoint identifier (TEI) | Dynamic |
Ring | No |
Key system (EKTS) | No |
Voice or data | Data |
DN must be set as follows: |
|
Parameter | Setting |
B1 | |
B2 | |
D | Signaling only |
MAXTERM | 1 |
MAXB CHNL | 2 |
ACT USR | Y |
CSD | 2 |
CSD CHL | Any |
Display | No |
CSD Limit | 2 |
CA PREF | 1 |
|
|