3Com 5000 manual Router Software Maintenance

Page 64

64Chapter 5: Router Software Maintenance

CAUTION: No TFTP/FTP Server is available with the Router 5000. You must install one yourself.

1Start TFTP or FTP Server on the PC connected to the Ethernet interface on the router and set the path for getting the source file. Given FTP Server, you need to set user name and password in addition.

2In Boot Menu, select <2> to enter Net Port Download Menu as follows:

Net Port Download Menu:

1:Change Net Parameter

2:Download From Net

3:Exit to Main Menu Enter your choice(1-3):1

3In Net Port Download Menu, select <1> for example to change the download parameters as follows:

Change Boot Parameter:

 

 

'.' = clear field;

'-' = go to previous field; ^D =

quit

 

 

 

boot device

 

: fei0

processor number

:

0

host name

 

:

8040

file name

: M8240ram.arj

inet on ethernet (e) : 169.254.10.10

inet on backplane (b):

 

host inet (h)

 

: 169.254.10.11

gateway inet (g)

:

 

user (u)

: 8040

 

ftp password (pw) (blank = use rsh):

flags (f)

: 0x0

 

target name (tn)

:

 

startup script (s)

:

 

other (o)

 

:

 

When upgrading with TFTP, set these parameters: file name: Name of the file to be downloaded

inet on ethernet (e): IP address of the Ethernet interface for downloading

host inet (h): IP address of TFTP Server

flags (f): 0x80

When upgrading with FTP, set these parameters: file name: Name of the file to be downloaded

Image 64
Contents 3Com Router 5000 Family 3Com Corporation Campus Drive Marlborough Page Page Contents Introduction Software Maintenance under v 3.11 Environment Register Your Product to Gain Service BenefitsContents Contents About This Guide Related ConventionsDocumentation Comments Pddtechpubscomments@3com.comAbout This Guide About RouterEthernet access solution By extending SICs and MIMs, 3Com Router 3C13701System Description Router 5012 IndicatorsSystem description of 3Com Router 3C13751 SLOT1~3 READY/ACTIVELEDs of 3Com 5232 Router ReadyNvram 3C13755 Router 5642 Indicators3Com Router 5642 Front view of 3Com Router Router 5642 Indicators 3C13759 3Com Router 5682 Front view of 3Com RouterRouter 5682 Indicators Introducing the Router 5000 Family Installing the Router on a Workbench InstallingRouter in a Rack Standard rack, as shown in FigurePower Cords Grounds and Cables Pgnd WirePower Cord AC Power Cord AC power supplyRecommended power outlet AC Power ConnectorConsole cable Console Terminal Introduction to console portAttributes of the console port Router to LAN Connection Introduction to the Ethernet interfaceEthernet cable Attributes of the Ethernet interfaceRouter to WAN ConnectionIntroduction to the AUX port AUX cableWAN Interface to Attributes of the synchronous/asynchronous serial interfaceAttributes of the synchronous/asynchronous serial interface Transmission rate and distance of V.24 RS232/V.35 cableDTE and DCE 24 RS232 DCE cable assembly DTE cable assembly35 DTE cable assembly 35 DCE cable assembly21 DTE cable assembly V24 DTE cable assembly 35 DCE cable assembly E1 interface to DSU/CSU 75Ω unbalanced coax cable120Ω balanced twisted pair cable E1 interface attributesE1 120Ω balanced twisted pair cable T1 interface to DSU/CSU T1interface attributesSetting up Configuration Environment Connecting the router to a console terminalSetting the parameters for console terminal Startup RouterSetting the connection port in the local configuration Checking before power-on Powering on the routerChecking/operating after power-on Press Enter and the screen will display Configuration Characteristics of the command line interfaceFundamentals Router InterfaceCommand line interface Starting and Configuring the Router Troubleshooting Power SystemTroubleshooting of nothing being displayed on the terminal ConsoleTroubleshooting of repeated reboot SdramSoftware Upgrade ApplicationTroubleshooting Configuration file IntroductionRouter manages three types of files Application image file main softwareMaintenance under Boot MenuSoftware EnvironmentDefault names and types of the boot files =MAIN B=BACKUP S=SECURE Flag set successfully Upgrading Software through Xmodem Upgrading the application imageDownload completed Upgrading the entire Boot ROM image Upgrading the application image through Ethernet Router Software Maintenance Software Maintenance under v 3.11 Environment Router Password Password loss. They can help you to set a new passwordDealing with a LossService Benefits Solve Problems OnlineRegister Your Product to GainWarranty ServicesAccess Software Purchase ExtendedTelephone Technical Contact UsSupport and Repair Country Telephone Number US and Canada Telephone Technical Support and Repair Appendix a Obtaining Support for Your 3COM Products
Related manuals
Manual 24 pages 21.07 Kb Manual 16 pages 27.17 Kb