3Com 9150, 9550 manual Key Product Features, Security

Page 11

1 INTRODUCTION

The 3Com AirConnect 9550 11n 2.4+5GHz PoE Access Point and the 3Com AirConnect 9150 11n 2.4GHz PoE Access Point are high performance access points that allow you to join isolated wired Ethernet networks into a unified wireless local area network (WLAN). The Access Point (AP) supports Wi-Fi Protected Access security standards to provide a higher level of security for network data and communications. The AP is also fully compatible with IEEE 802.11a (the 9550 AP only), 802.11b, 802.11g, and 802.11n.

Key Product Features

The product operates using 11a (9550 AP only), 11b, 11g, or 11n modes. This AP creates an enterprise-class wireless LAN, supporting up to 64 simultaneous users.

Security

3Com offers one of the most robust suites of standards-based security on the market today. To protect sensitive data broadcast over the wireless LAN, 3Com supports Wireless Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA and WPA2).

Image 11
Contents 3Com AirConnect 9550 11n 2.4+5GHz PoE Access Point Page 3Com Corporation 350 Campus Drive Marlborough, MA Environmental Statement Introduction Ssid Bssid Iapp Troubleshooting Antennas Used per Mode Console Cable Pin-out Page Security Key Product FeaturesManageability Performance and Reliability802.11a Wireless Network Standards802.11b/g Ieee 802.3af Installing Your 3com Wireless Access Point Networks with a Dhcp Server Access PointNetworks without a Dhcp Server 3Com Wireless Wireless Infrastructure Device Manager Launching the 3Com Wireless Infrastructure Device Manager3Com Wireless Infrastructure Device Manager Click on the Properties button to see the following screen Logon Screen System Summary System StatusFirst Time Only System Summary Wireless Station List Wireless Station ListEvent Log List Event Log ListSetup Wizard System Configuration4G Radio Wireless Network WEP System Properties 4G Wireless Security SettingsWireless Bridge Mode Access Point modeIP Settings Wireless Network Wireless NetworkCurrent Profiles Wireless ModeStandard Channel Ssid Profile Settings Station Separation Suppressed SsidWEP SecurityWPA Only WPA2-Only Profile Ssid Isolation WDS Link SettingsWPA2-Mixed System Configuration WEP WPA-PSK Tkip WPA-PSK AES WDS Security SettingsWireless Advanced Settings Transmit PowerFragment Length Association TimeoutBeacon Interval Data Beacon RateAggregation Support 802.11d supportDistance Antenna TypeQoS Management Vlan Service802.11F Iapp Support Choose either Enable or DisableClick Add Ack-Policy Setting DescriptionDefault value table Sntp Following settings can be configured System Log Syslog FunctionSyslog Level Syslog ServerSyslog Port Management AdministrationSnmp MAC Filtering Access Control ListRogue AP Detection Rogue AP DetectionBackup/Restore Settings Backup/ Restore SettingsFirmware Auto Upgrade Firmware Auto UpgradeFirmware Upgrade Firmware Manual UpgradeResult Reboot RebootingConnecting Through the Com Port Reset Hole Location Restoring Factory SettingsDiagnosing Problems TroubleshootingSymptom Solution s Disconnecting the Access Point Upgrading Access Point Firmware Telephone Technical Support and Repair 3COM ProductTelephone Technical Support and Repair END-USER License Agreement Telephone Technical Support and Repair Appendix Antennas Used per ModeMode Antennas Used Console Cable Pin-out RJ45 to D-SUB 9 pin cable Console Cable Pin-out Numerics IndexSsid WPA