Radio Shack PRO-83 manual Setting up your scanner, Connecting the Antenna

Page 13

setting up your scanner

Connecting the Antenna

To attach the supplied flexible antenna to the connector on the top of your scanner, align the slots around the antenna's connector with the tabs on the scanner's BNC connector. Then slide the antenna's connector down over the scanner's connector and rotate the antenna connector's outer ring clockwise until it locks into place.

Connecting an Optional Antenna

The scanner's BNC connector makes it easy to connect a variety of optional antennas, including an external mobile antenna or outdoor base station antenna. Your local RadioShack store sells a wide selection of antennas.

13	The Basics

Image 13

Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Connecting the Antenna Setting up your scannerConnecting an Optional Antenna Listening Safely Connecting an Earphone/HeadphoneConnecting an Extension Speaker Traffic SafetyAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Channel Storage Banks Understanding Banks Service BanksOperating your scanner Turning On The Scanner and Setting SquelchStoring Known Frequencies Into Channels Beyond the Basics Beyond the Basics Searching For Temporarily Storing Active Frequencies Service SearchStoring Frequencies into Channels During Service Search Manually Selecting a Channel Scanning the Stored ChannelsSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker About Skywarn SkywarnBeyond the Basics Chain Search WX Alert Turning On the Weather Alert FeatureChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Locking Out Channels Turning Channel-Storage Banks On and OffLocking Out Frequencies Priority SCAN, FUNC, HOLD, , KEYLOCK, Using KeylockWired Programming Using the Display/Key Backlight Resetting the Scanner My scanner isn’t working at all. How do I turn it on? Frequently asked questionsFlashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Belt Clip IndexEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA

Related manuals

Manual 64 pages 49.98 Kb