Press FUNC + 
to decrease the frequency by one step or FUNC + 
to increase it by one step. Hold
down 
or 
for about 1 second to quickly decrease or increase the frequency.
To resume direct search, press FUNC + SEARCH or HOLD. ( 
or 
appears on the display, showing the search direction).
Storing Frequencies Found During Direct Entry Search into Channel Memory
Follow these steps to store frequencies received during direct entry search mode or direct entry search hold mode.
XPress FUNC + PGM in direct entry search mode or direct entry search hold mode. The frequency and lowest blank channel alternate on the display.
YPress E to store the frequency into the blank channel. To select another channel, press FUNC
+ 
or 
. Then press FUNC. 
disappears. Then press E. You can also use the
If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press
Beyond the Basics | 44 |