Radio Shack PRO-83 manual Beyond the Basics

Page 33

YRepeatedly press or to select the option you want, then press E.

If you selected S-S.bnd, one of the following band names appears.

bnd Lo: VHF Low Band (25.0000 - 54.0000 MHz)

bnd Air: AIR Band (108.0000 - 136.9875 MHz)

bnd Hi: VHF High Band (137.0000 - 174.0000 MHz)

bnd UHF: UHF Band (406.0000 - 512.0000 MHz)

bnd 800: 800MHz Band (806.0000 - 956.0000 MHz)

If you selected S-S.Alt, skip to Step [.

ZRepeatedly press or until the band you want to search appears, then press E to select it. Otherwise, press ./CLR if you do not want to select it.

The scanner displays the following options.

Lo On or Lo OFF Air On or Air OFF Hi On or Hi OFF UHF On or UHF OFF 800 On or 800 OFF

33

Beyond the Basics

Image 33
Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Setting up your scanner Connecting the AntennaConnecting an Optional Antenna Listening Safely Connecting an Earphone/HeadphoneConnecting an Extension Speaker Traffic SafetyAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Channel Storage Banks Understanding Banks Service BanksTurning On The Scanner and Setting Squelch Operating your scannerStoring Known Frequencies Into Channels Beyond the Basics Beyond the Basics Searching For Temporarily Storing Active Frequencies Service SearchStoring Frequencies into Channels During Service Search Manually Selecting a Channel Scanning the Stored ChannelsSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker About Skywarn SkywarnBeyond the Basics Chain Search WX Alert Turning On the Weather Alert FeatureChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Locking Out Channels Turning Channel-Storage Banks On and OffLocking Out Frequencies Priority SCAN, FUNC, HOLD, , KEYLOCK, Using KeylockWired Programming Using the Display/Key Backlight Resetting the Scanner My scanner isn’t working at all. How do I turn it on? Frequently asked questionsFlashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Belt Clip IndexEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA
Related manuals
Manual 64 pages 49.98 Kb