Radio Shack PRO-83 manual Wired Programming

Page 52

Wired Programming

You can transfer programming data to your scanner using your PC and an optional interface cable (Cat. No. 20-289, available at your local RadioShack store) and software (available at your local RadioShack or www.radioshack.com).

Note: If the scanner receives no data from the PC for more than 20 seconds, T-Errappears and wired programming stops.

XMake sure your scanner is turned off.

YConnect the interface cable to your computer then connect the other end of the cable to PC/IF on the side of the scanner.

ZInstall the software to your computer and run the program.

Beyond the Basics

52

Image 52

Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Connecting the Antenna Setting up your scannerConnecting an Optional Antenna Connecting an Earphone/Headphone Listening SafelyTraffic Safety Connecting an Extension SpeakerAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Understanding Banks Service Banks Channel Storage BanksOperating your scanner Turning On The Scanner and Setting SquelchStoring Known Frequencies Into Channels Beyond the Basics Beyond the Basics Service Search Searching For Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored Channels Manually Selecting a ChannelSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker Skywarn About SkywarnBeyond the Basics WX Alert Turning On the Weather Alert Feature Chain SearchChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Turning Channel-Storage Banks On and Off Locking Out ChannelsLocking Out Frequencies Priority Using Keylock SCAN, FUNC, HOLD, , KEYLOCK,Wired Programming Using the Display/Key Backlight Resetting the Scanner Frequently asked questions My scanner isn’t working at all. How do I turn it on?Flashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Index Belt ClipEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA

Related manuals

Manual 64 pages 49.98 Kb