Radio Shack PRO-83 manual Chain Search Hold Mode

Page 40

At least one search bank must be enabled. (The scanner sounds an error tone if you try to disable all the search banks). The search bank and the frequency where chain search starts depends on how the scanner was set before you selected chain search mode.

Chain Search Hold Mode

To start chain search hold mode, press HOLD in chain search mode. The scanner stops searching and HOLD appears. In this mode, pressing

FUNC + changes the search direction downward and pressing FUNC + changes the

search direction upward. or appears according to the current search direction.

Pressing while appears decreases the frequency by one step and pressing increases it

by one step. Hold down or to quickly decrease or increase the frequency. To resume chain

search, press HOLD if does not appear on the display or press SRCH if appears on the display.

Beyond the Basics

40

Image 40

Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Connecting the Antenna Setting up your scannerConnecting an Optional Antenna Connecting an Earphone/Headphone Listening SafelyTraffic Safety Connecting an Extension SpeakerAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Understanding Banks Service Banks Channel Storage BanksOperating your scanner Turning On The Scanner and Setting SquelchStoring Known Frequencies Into Channels Beyond the Basics Beyond the Basics Service Search Searching For Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored Channels Manually Selecting a ChannelSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker Skywarn About Skywarn Beyond the Basics WX Alert Turning On the Weather Alert Feature Chain SearchChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Turning Channel-Storage Banks On and Off Locking Out ChannelsLocking Out Frequencies Priority Using Keylock SCAN, FUNC, HOLD, , KEYLOCK,Wired Programming Using the Display/Key Backlight Resetting the Scanner Frequently asked questions My scanner isn’t working at all. How do I turn it on?Flashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Index Belt ClipEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA

Related manuals

Manual 64 pages 49.98 Kb