Radio Shack PRO-83 manual Program Band Select Mode

Page 41

Storing Frequencies Found During Chain Search into Channel Memory

You can store frequencies you find in chain search mode or chain search hold mode.

XPress FUNC + PGM in chain search mode or chain search hold mode. The lowest blank channel and bank appear.

YPress E to store the frequency into the blank channel. To select another channel, press FUNC + or before you press E. To enter the

frequency, press FUNC. disappears. Then press E. You can also press 0-9to select the bank.

If you try to save a frequency that is already stored, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press ./CLR. To enter the frequency anyway, press E to accept.

The scanner sets itself to program mode after you store a frequency.

Program Band Select Mode

You can use this mode to define the search range used during a chain search in each search bank. To set the scanner to program band select mode, press FUNC + B.SLCT. SEARCH appears. Then select a search bank.

41

Beyond the Basics

Image 41
Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Connecting an Optional Antenna Setting up your scannerConnecting the Antenna Listening Safely Connecting an Earphone/HeadphoneConnecting an Extension Speaker Traffic SafetyAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Channel Storage Banks Understanding Banks Service BanksStoring Known Frequencies Into Channels Turning On The Scanner and Setting SquelchOperating your scanner Beyond the Basics Beyond the Basics Searching For Temporarily Storing Active Frequencies Service SearchStoring Frequencies into Channels During Service Search Manually Selecting a Channel Scanning the Stored ChannelsSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker About Skywarn SkywarnBeyond the Basics Chain Search WX Alert Turning On the Weather Alert FeatureChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Locking Out Channels Turning Channel-Storage Banks On and OffLocking Out Frequencies Priority SCAN, FUNC, HOLD, , KEYLOCK, Using KeylockWired Programming Using the Display/Key Backlight Resetting the Scanner My scanner isn’t working at all. How do I turn it on? Frequently asked questionsFlashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Belt Clip IndexEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA
Related manuals
Manual 64 pages 49.98 Kb