Radio Shack PRO-83 manual Scanning the Stored Channels, Manually Selecting a Channel

Page 30

Scanning the Stored Channels

To begin scanning channels, press SCAN. The scanner scans through all non-locked channels in the activated banks. (See “Locking Out Channels” on Page 48 and “Turning Channel-Storage Banks On and Off” on Page 48). When the scanner finds a transmission, it stops on it. When the transmission ends, the scanner resumes scanning.

Notes:

•If you have not stored frequencies into any channels, the scanner does not scan.

•If the scanner picks up unwanted partial, or very weak transmissions, turn SQUELCH clockwise to decrease the scanner's sensitivity to these signals. To listen to a weak or distant station, turn SQUELCH counterclockwise.

•To ensure proper scanning, adjust SQUELCH until the audio mutes.

Manually Selecting a Channel

You can continuously monitor a single channel without scanning. This is useful if you hear an emergency broadcast on a channel and do not want to miss any details - even though there might be periods of silence - or if you want to monitor a specific channel.

Beyond the Basics

30

Image 30

Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Setting up your scanner Connecting the AntennaConnecting an Optional Antenna Connecting an Earphone/Headphone Listening SafelyTraffic Safety Connecting an Extension SpeakerAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Understanding Banks Service Banks Channel Storage BanksTurning On The Scanner and Setting Squelch Operating your scannerStoring Known Frequencies Into Channels Beyond the Basics Beyond the Basics Service Search Searching For Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored Channels Manually Selecting a ChannelSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker Skywarn About SkywarnBeyond the Basics WX Alert Turning On the Weather Alert Feature Chain SearchChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Turning Channel-Storage Banks On and Off Locking Out ChannelsLocking Out Frequencies Priority Using Keylock SCAN, FUNC, HOLD, , KEYLOCK,Wired Programming Using the Display/Key Backlight Resetting the Scanner Frequently asked questions My scanner isn’t working at all. How do I turn it on?Flashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Index Belt ClipEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA

Related manuals

Manual 64 pages 49.98 Kb