Radio Shack PRO-83 manual Using the Display/Key Backlight

Page 53

[To set up the program, click on Tools, select Configuration, and select PRO-83 (if necessary).

\Turn on the scanner. The scanner automatically goes into the wired programming mode. PGM and WirEd appear. Then send the data from the PC.

Data frame numbers being received appear.

]When the scanner has successfully received all data, End appears. If the scanner received an error while receiving data, End, d-Err, and its frame number appear. If the scanner received a communication error while receiving data, C-Errindicates the packet number where the error occurred. If the scanner received a checksum error while receiving data, S-Errindicates the packet number where the error occurred. If the scanner received a length field error while receiving data, L-Errindicates the packet number where the error occurred.

Using the Display/Key Backlight

To turn on the display/key light for easy viewing at

night, press . The display lights for 15 seconds.

To turn off the light sooner, press again.

53	Beyond the Basics

Image 53

Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Basics Using Rechargeable Batteries Basics Basics Using AC Power Using Vehicle Battery Power Basics Connecting an Optional Antenna Setting up your scannerConnecting the Antenna Listening Safely Connecting an Earphone/HeadphoneConnecting an Extension Speaker Traffic SafetyAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Basics Channel Storage Banks Understanding Banks Service BanksStoring Known Frequencies Into Channels Turning On The Scanner and Setting SquelchOperating your scanner Beyond the Basics Beyond the Basics Searching For Temporarily Storing Active Frequencies Service SearchStoring Frequencies into Channels During Service Search Manually Selecting a Channel Scanning the Stored ChannelsSignal Stalker Setting the Signal Stalker Options Beyond the Basics Beyond the Basics Using Signal Stalker About Skywarn SkywarnBeyond the Basics Chain Search WX Alert Turning On the Weather Alert FeatureChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Beyond the Basics Search Skip Memory Beyond the Basics Delay Locking Out Channels Turning Channel-Storage Banks On and OffLocking Out Frequencies Priority SCAN, FUNC, HOLD, , KEYLOCK, Using KeylockWired Programming Using the Display/Key Backlight Resetting the Scanner My scanner isn’t working at all. How do I turn it on? Frequently asked questionsFlashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Belt Clip IndexEarphone Connecting Extension Speaker Squelch Setting Warranty UBZZ01327ZA

Related manuals

Manual 64 pages 49.98 Kb