Dynaudio SUB 600 Connecting the subwoofer, Damage of device due to improper connection

Page 13

OPERATION

	Connecting the subwoofer

NOTICE	Damage of device due to improper connection
	 Set the mains power switch to OFF before connecting the Sub 600.
	 Only switch the subwoofer on (mains power switch to ON) after all connections and set
	up steps have been properly completed.

	Note: The Dynaudio Sub 600 can be controlled by any source provided with a LFE or
	preamplifier output. In the operating manual the expression “processor/receiver”
	will be used for all these sources.

10	Dynaudio Sub 600

Image 13

Contents Page Contents Page Introduction Important Safety Instructions Vases, should not be placed on this apparatus Risk of Electric Shock. Do Not OpenSupply cord shall remain readily operable Qualified personnelSafety signs Used signs and symbolsGeneral safety sign Signal wordsText markings How this operating manual is structuredUnpacking Check that the contents are completeTo unpack the subwoofer To remove the grille GrilleTo fit the grille ➍ SAT Highpass Controls and connections➎ SUB Lowpass ➏ SAT/SUB Input, SAT Output➑ LFE/Slave ➐ SUB I/O, To SlaveDamage of device due to improper connection Connecting the subwooferSubwoofer inputs Highpass settingSUB I/O LFE/Slave SAT/SUB Input➊ To connect the SAT/SUB input Connecting a single subwooferSUB Input ➋ To connect the LFE channelTo connect multiple subwoofers Multiple subwoofer connectionsTo connect speakers Connecting loudspeakersPower mode Switching the subwoofer on/offAuto Power mode High Sound Levels Adjusting the volume GainTo select the cut-off frequency Selecting the subwoofer cut-off frequency SUB LowpassTo find the correct phase setting Setting the phase PhaseTo set the cut-off frequency Setting the satellite cut-off frequency SAT HighpassChoose adequate music material Positioning the subwooferListening Room Impact of room-modesPositioning possibilities Corner placementNext to wall, away from corner Free standing, away from wall and cornerUsing multiple subwoofers General tips Cut-off frequencies Volume GainSubwoofer too low, main speakers too high Cross-over frequencies set correctlySubwoofer too high, main speakers too low General tips Control possibilities SUB Lowpass = 80 Hz  Reduce weak amplifiers and small speakers from bass loadDamage of Small Satellite Speakers Specific tipsSUB Lowpass = 150 Hz at the very right SAT Highpass = Flat Cut-off frequencies Check this first TroubleshootingTroubleshooting Cleaning the cabinet Care and MaintenanceTo clean the cabinet Damage of drive unitsRecycling used products Changing the fuseRisk of Fire To change the fuseWarranty Parameter Sub Technical specificationsPage Page Page All there is

SUB 600 specifications

The Dynaudio SUB 600 is a powerful subwoofer designed to bring an enhanced level of bass performance to home audio systems. Known for its robust build quality and exceptional sound reproduction, the SUB 600 is a versatile choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the Dynaudio SUB 600 is its impressive 18-inch driver, which is engineered to deliver deep, impactful bass across a wide frequency range. This driver utilizes advanced materials, including a specially designed cone and high-stiffness surround, to ensure minimal distortion and maximum clarity at high output levels. This means that whether you're enjoying music or watching an action-packed movie, you can expect a rich and immersive bass experience.

The SUB 600 is powered by a built-in amplifier that delivers a robust output of up to 500 watts RMS, capable of handling the most demanding audio tracks with ease. This amplifier is designed to work seamlessly with the subwoofer's driver, providing the necessary power and control to reproduce low frequencies accurately. The result is a dynamic sound that adds depth and presence to any audio setup.

Dynaudio has also integrated advanced technologies into the SUB 600 to optimize performance. The subwoofer features a sophisticated digital signal processing (DSP) system that allows for precise tuning of the low-frequency response. This ensures that the SUB 600 can adapt to different room acoustics, delivering the best possible bass performance regardless of placement.

Furthermore, the SUB 600 comes with a range of connectivity options, including high-level and low-level inputs. This allows it to easily integrate with various audio systems, from stereo setups to multi-channel home theaters. The inclusion of an adjustable crossover frequency control enables users to fine-tune the integration with their main speakers, ensuring a seamless blend of sound.

In terms of aesthetics, the Dynaudio SUB 600 boasts a sleek design that will fit well into any entertainment environment. It is available in a selection of finishes that can complement your existing decor. With its combination of high-quality materials, advanced technologies, and performance-driven design, the Dynaudio SUB 600 stands out as an exceptional choice for anyone seeking to elevate their audio experience to the next level. Whether for serious music listening or immersive movie watching, the SUB 600 delivers powerful bass that enhances any audio experience.