Dynaudio SUB 600 owner manual Care and Maintenance, Cleaning the cabinet, Damage of drive units

Page 35

TECHNICAL INFORMATION/WARRANTY

	Care and Maintenance
	Components of the highest quality are used in your Sub 600. This assures years of trouble
	free operation. Following precautions should still be made though.
	Cleaning the cabinet

NOTICE	Damage of drive units
	Touching the drive units may damage them.
	 Do not touch the drive units by hand when cleaning the cabinet.

To clean the cabinet:

Use a moistened cloth or a mild detergent. Do not use aggressive cleaning solutions.

32	Dynaudio Sub 600

Image 35

Contents Page Contents Page Introduction Important Safety Instructions Qualified personnel Risk of Electric Shock. Do Not OpenVases, should not be placed on this apparatus Supply cord shall remain readily operableSignal words Used signs and symbolsSafety signs General safety signText markings How this operating manual is structuredTo unpack the subwoofer Check that the contents are completeUnpacking To fit the grille GrilleTo remove the grille ➏ SAT/SUB Input, SAT Output Controls and connections➍ SAT Highpass ➎ SUB Lowpass➑ LFE/Slave ➐ SUB I/O, To SlaveDamage of device due to improper connection Connecting the subwooferSAT/SUB Input Highpass settingSubwoofer inputs SUB I/O LFE/Slave➋ To connect the LFE channel Connecting a single subwoofer➊ To connect the SAT/SUB input SUB InputTo connect multiple subwoofers Multiple subwoofer connectionsTo connect speakers Connecting loudspeakersAuto Power mode Switching the subwoofer on/offPower mode High Sound Levels Adjusting the volume GainTo select the cut-off frequency Selecting the subwoofer cut-off frequency SUB LowpassTo find the correct phase setting Setting the phase PhaseTo set the cut-off frequency Setting the satellite cut-off frequency SAT HighpassChoose adequate music material Positioning the subwooferListening Room Impact of room-modesFree standing, away from wall and corner Corner placementPositioning possibilities Next to wall, away from cornerUsing multiple subwoofers General tips Cut-off frequencies Volume GainSubwoofer too high, main speakers too low Cross-over frequencies set correctlySubwoofer too low, main speakers too high  Reduce weak amplifiers and small speakers from bass load Control possibilitiesGeneral tips  SUB Lowpass = 80 HzSUB Lowpass = 150 Hz at the very right SAT Highpass = Flat Specific tipsDamage of Small Satellite Speakers Cut-off frequencies Check this first TroubleshootingTroubleshooting Damage of drive units Care and MaintenanceCleaning the cabinet To clean the cabinetTo change the fuse Changing the fuseRecycling used products Risk of FireWarranty Parameter Sub Technical specificationsPage Page Page All there is

SUB 600 specifications

The Dynaudio SUB 600 is a powerful subwoofer designed to bring an enhanced level of bass performance to home audio systems. Known for its robust build quality and exceptional sound reproduction, the SUB 600 is a versatile choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the Dynaudio SUB 600 is its impressive 18-inch driver, which is engineered to deliver deep, impactful bass across a wide frequency range. This driver utilizes advanced materials, including a specially designed cone and high-stiffness surround, to ensure minimal distortion and maximum clarity at high output levels. This means that whether you're enjoying music or watching an action-packed movie, you can expect a rich and immersive bass experience.

The SUB 600 is powered by a built-in amplifier that delivers a robust output of up to 500 watts RMS, capable of handling the most demanding audio tracks with ease. This amplifier is designed to work seamlessly with the subwoofer's driver, providing the necessary power and control to reproduce low frequencies accurately. The result is a dynamic sound that adds depth and presence to any audio setup.

Dynaudio has also integrated advanced technologies into the SUB 600 to optimize performance. The subwoofer features a sophisticated digital signal processing (DSP) system that allows for precise tuning of the low-frequency response. This ensures that the SUB 600 can adapt to different room acoustics, delivering the best possible bass performance regardless of placement.

Furthermore, the SUB 600 comes with a range of connectivity options, including high-level and low-level inputs. This allows it to easily integrate with various audio systems, from stereo setups to multi-channel home theaters. The inclusion of an adjustable crossover frequency control enables users to fine-tune the integration with their main speakers, ensuring a seamless blend of sound.

In terms of aesthetics, the Dynaudio SUB 600 boasts a sleek design that will fit well into any entertainment environment. It is available in a selection of finishes that can complement your existing decor. With its combination of high-quality materials, advanced technologies, and performance-driven design, the Dynaudio SUB 600 stands out as an exceptional choice for anyone seeking to elevate their audio experience to the next level. Whether for serious music listening or immersive movie watching, the SUB 600 delivers powerful bass that enhances any audio experience.