Dynaudio SUB 600 owner manual Adjusting the volume Gain, High Sound Levels

Page 19

OPERATION

 

Adjusting the volume (GAIN)

 

 

CAUTION

High Sound Levels

 

To avoid auditory defects do not listen to high sound levels

 

over a longer period of time.

 

 

POWER GAINPHASE

ON AUTO

0° 180°

MinMax

The correct volume setting is an important aspect in achieving a well balanced speaker combination. Please also refer to “Specific tips” on page 28 for further information or ask your local Dynaudio dealer for assistance.

Adjust the GAIN control, until correct setting is reached.

Note: You can not adjust the volume, when subwoofer is in slave mode. In this case the volume is controlled by the setting of the master subwoofer.

16

Dynaudio Sub 600

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Contents Page Introduction Important Safety Instructions Qualified personnel Risk of Electric Shock. Do Not OpenVases, should not be placed on this apparatus Supply cord shall remain readily operableSignal words Used signs and symbolsSafety signs General safety signText markings How this operating manual is structuredUnpacking Check that the contents are completeTo unpack the subwoofer To remove the grille GrilleTo fit the grille ➏ SAT/SUB Input, SAT Output Controls and connections➍ SAT Highpass ➎ SUB Lowpass➑ LFE/Slave ➐ SUB I/O, To SlaveDamage of device due to improper connection Connecting the subwooferSAT/SUB Input Highpass settingSubwoofer inputs SUB I/O LFE/Slave➋ To connect the LFE channel Connecting a single subwoofer➊ To connect the SAT/SUB input SUB InputTo connect multiple subwoofers Multiple subwoofer connectionsTo connect speakers Connecting loudspeakersPower mode Switching the subwoofer on/offAuto Power mode High Sound Levels Adjusting the volume GainTo select the cut-off frequency Selecting the subwoofer cut-off frequency SUB LowpassTo find the correct phase setting Setting the phase PhaseTo set the cut-off frequency Setting the satellite cut-off frequency SAT HighpassChoose adequate music material Positioning the subwooferListening Room Impact of room-modesFree standing, away from wall and corner Corner placementPositioning possibilities Next to wall, away from cornerUsing multiple subwoofers General tips Cut-off frequencies Volume GainSubwoofer too low, main speakers too high Cross-over frequencies set correctlySubwoofer too high, main speakers too low  Reduce weak amplifiers and small speakers from bass load Control possibilitiesGeneral tips  SUB Lowpass = 80 HzDamage of Small Satellite Speakers Specific tipsSUB Lowpass = 150 Hz at the very right SAT Highpass = Flat Cut-off frequencies Check this first TroubleshootingTroubleshooting Damage of drive units Care and MaintenanceCleaning the cabinet To clean the cabinetTo change the fuse Changing the fuseRecycling used products Risk of FireWarranty Parameter Sub Technical specificationsPage Page Page All there is

SUB 600 specifications

The Dynaudio SUB 600 is a powerful subwoofer designed to bring an enhanced level of bass performance to home audio systems. Known for its robust build quality and exceptional sound reproduction, the SUB 600 is a versatile choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the Dynaudio SUB 600 is its impressive 18-inch driver, which is engineered to deliver deep, impactful bass across a wide frequency range. This driver utilizes advanced materials, including a specially designed cone and high-stiffness surround, to ensure minimal distortion and maximum clarity at high output levels. This means that whether you're enjoying music or watching an action-packed movie, you can expect a rich and immersive bass experience.

The SUB 600 is powered by a built-in amplifier that delivers a robust output of up to 500 watts RMS, capable of handling the most demanding audio tracks with ease. This amplifier is designed to work seamlessly with the subwoofer's driver, providing the necessary power and control to reproduce low frequencies accurately. The result is a dynamic sound that adds depth and presence to any audio setup.

Dynaudio has also integrated advanced technologies into the SUB 600 to optimize performance. The subwoofer features a sophisticated digital signal processing (DSP) system that allows for precise tuning of the low-frequency response. This ensures that the SUB 600 can adapt to different room acoustics, delivering the best possible bass performance regardless of placement.

Furthermore, the SUB 600 comes with a range of connectivity options, including high-level and low-level inputs. This allows it to easily integrate with various audio systems, from stereo setups to multi-channel home theaters. The inclusion of an adjustable crossover frequency control enables users to fine-tune the integration with their main speakers, ensuring a seamless blend of sound.

In terms of aesthetics, the Dynaudio SUB 600 boasts a sleek design that will fit well into any entertainment environment. It is available in a selection of finishes that can complement your existing decor. With its combination of high-quality materials, advanced technologies, and performance-driven design, the Dynaudio SUB 600 stands out as an exceptional choice for anyone seeking to elevate their audio experience to the next level. Whether for serious music listening or immersive movie watching, the SUB 600 delivers powerful bass that enhances any audio experience.
Top Page Image Contents