Dynaudio SUB 600 owner manual Impact of room-modes, Listening Room

Page 24

Positioning the subwoofer

1/4

 

1/2

 

3/4

 

 

 

 

 

 

 

 

1/4

Listening Room

1/2

3/4

Impact of room-modes

Every listening environment will have specific “room-modes”, whereby in some specific locations in the room and at particular frequencies, the bass may be too much or too lean. This effect will be stronger in square and “shoe-box” shaped rooms. With a single subwoofer, the better position for the subwoofer relative to the listening position will be the one where bass is perceived to be neither too much nor too lean at any given frequency.

Avoid placing the subwoofer at 1/4, 1/2 or 3/4 of either the length or width of the room as at these locations the room-modes are likely to be strongest (the dashed lines in the figure)

Note: Always position subwoofers at least 1 mtr/3 ft away from a CRT television as the magnetic field emanating from the subwoofer may otherwise distort the picture. If you see discoloration on the television screen, try moving the subwoofer and other speakers close by away from the television.

Owners Manual

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Contents Page Introduction Important Safety Instructions Risk of Electric Shock. Do Not Open Vases, should not be placed on this apparatusSupply cord shall remain readily operable Qualified personnelUsed signs and symbols Safety signsGeneral safety sign Signal wordsHow this operating manual is structured Text markingsCheck that the contents are complete UnpackingTo unpack the subwoofer Grille To remove the grilleTo fit the grille Controls and connections ➍ SAT Highpass➎ SUB Lowpass ➏ SAT/SUB Input, SAT Output➐ SUB I/O, To Slave ➑ LFE/SlaveConnecting the subwoofer Damage of device due to improper connectionHighpass setting Subwoofer inputsSUB I/O LFE/Slave SAT/SUB InputConnecting a single subwoofer ➊ To connect the SAT/SUB inputSUB Input ➋ To connect the LFE channelMultiple subwoofer connections To connect multiple subwoofersConnecting loudspeakers To connect speakersSwitching the subwoofer on/off Power modeAuto Power mode Adjusting the volume Gain High Sound LevelsSelecting the subwoofer cut-off frequency SUB Lowpass To select the cut-off frequencySetting the phase Phase To find the correct phase settingSetting the satellite cut-off frequency SAT Highpass To set the cut-off frequencyPositioning the subwoofer Choose adequate music materialImpact of room-modes Listening RoomCorner placement Positioning possibilitiesNext to wall, away from corner Free standing, away from wall and cornerUsing multiple subwoofers General tips Volume Gain Cut-off frequenciesCross-over frequencies set correctly Subwoofer too low, main speakers too highSubwoofer too high, main speakers too low Control possibilities General tips SUB Lowpass = 80 Hz  Reduce weak amplifiers and small speakers from bass loadSpecific tips Damage of Small Satellite SpeakersSUB Lowpass = 150 Hz at the very right SAT Highpass = Flat Cut-off frequencies Troubleshooting Check this firstTroubleshooting Care and Maintenance Cleaning the cabinetTo clean the cabinet Damage of drive unitsChanging the fuse Recycling used productsRisk of Fire To change the fuseWarranty Technical specifications Parameter SubPage Page Page All there is

SUB 600 specifications

The Dynaudio SUB 600 is a powerful subwoofer designed to bring an enhanced level of bass performance to home audio systems. Known for its robust build quality and exceptional sound reproduction, the SUB 600 is a versatile choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the Dynaudio SUB 600 is its impressive 18-inch driver, which is engineered to deliver deep, impactful bass across a wide frequency range. This driver utilizes advanced materials, including a specially designed cone and high-stiffness surround, to ensure minimal distortion and maximum clarity at high output levels. This means that whether you're enjoying music or watching an action-packed movie, you can expect a rich and immersive bass experience.

The SUB 600 is powered by a built-in amplifier that delivers a robust output of up to 500 watts RMS, capable of handling the most demanding audio tracks with ease. This amplifier is designed to work seamlessly with the subwoofer's driver, providing the necessary power and control to reproduce low frequencies accurately. The result is a dynamic sound that adds depth and presence to any audio setup.

Dynaudio has also integrated advanced technologies into the SUB 600 to optimize performance. The subwoofer features a sophisticated digital signal processing (DSP) system that allows for precise tuning of the low-frequency response. This ensures that the SUB 600 can adapt to different room acoustics, delivering the best possible bass performance regardless of placement.

Furthermore, the SUB 600 comes with a range of connectivity options, including high-level and low-level inputs. This allows it to easily integrate with various audio systems, from stereo setups to multi-channel home theaters. The inclusion of an adjustable crossover frequency control enables users to fine-tune the integration with their main speakers, ensuring a seamless blend of sound.

In terms of aesthetics, the Dynaudio SUB 600 boasts a sleek design that will fit well into any entertainment environment. It is available in a selection of finishes that can complement your existing decor. With its combination of high-quality materials, advanced technologies, and performance-driven design, the Dynaudio SUB 600 stands out as an exceptional choice for anyone seeking to elevate their audio experience to the next level. Whether for serious music listening or immersive movie watching, the SUB 600 delivers powerful bass that enhances any audio experience.
Top Page Image Contents