Dynaudio SUB 600 owner manual Switching the subwoofer on/off, Auto Power mode

Page 18

Switching the subwoofer on/off

100-120V/220-240V

~ 50/60Hz 3.15A

ON

OFF

FUSE T3.15A L 250V

POWER GAINPHASE

ON AUTO

0° 180°

MinMax

Switching the subwoofer on/off

Once you have ensured yourself that all necessary connections have been made, the subwoofer and the connected components can be switched on.

Switch the subwoofer ON with the main POWER switch on the rear panel. The status LED on the rear of the subwoofer will light up red.

Power mode

After switching on the Sub 600 the Power mode should be selected:

ON: The amplifier is constantly on.

AUTO: The Auto Power mode is enabled.

Auto Power mode

When a music signal is detected, the internal amplifier is activated automatically. The status LED on the rear of the subwoofer will light up green.

As long as a signal is available on the subwoofer’s input, it will remain switched on.

After 15 to 20 minutes of not sensing any input signal, the subwoofer will switch itself to mute mode automatically.

The status LED on the rear of the subwoofer will light up red.

Note: To switch the subwoofer completely off, set the main power switch to the OFF position.

Owners Manual

15

Image 18
Contents Page Contents Page Introduction Important Safety Instructions Supply cord shall remain readily operable Risk of Electric Shock. Do Not OpenVases, should not be placed on this apparatus Qualified personnelGeneral safety sign Used signs and symbolsSafety signs Signal wordsHow this operating manual is structured Text markingsCheck that the contents are complete UnpackingTo unpack the subwoofer Grille To remove the grilleTo fit the grille ➎ SUB Lowpass Controls and connections➍ SAT Highpass ➏ SAT/SUB Input, SAT Output➐ SUB I/O, To Slave ➑ LFE/SlaveConnecting the subwoofer Damage of device due to improper connectionSUB I/O LFE/Slave Highpass settingSubwoofer inputs SAT/SUB InputSUB Input Connecting a single subwoofer➊ To connect the SAT/SUB input ➋ To connect the LFE channelMultiple subwoofer connections To connect multiple subwoofersConnecting loudspeakers To connect speakersSwitching the subwoofer on/off Power modeAuto Power mode Adjusting the volume Gain High Sound LevelsSelecting the subwoofer cut-off frequency SUB Lowpass To select the cut-off frequencySetting the phase Phase To find the correct phase settingSetting the satellite cut-off frequency SAT Highpass To set the cut-off frequencyPositioning the subwoofer Choose adequate music materialImpact of room-modes Listening RoomNext to wall, away from corner Corner placementPositioning possibilities Free standing, away from wall and cornerUsing multiple subwoofers General tips Volume Gain Cut-off frequenciesCross-over frequencies set correctly Subwoofer too low, main speakers too highSubwoofer too high, main speakers too low  SUB Lowpass = 80 Hz Control possibilitiesGeneral tips  Reduce weak amplifiers and small speakers from bass loadSpecific tips Damage of Small Satellite SpeakersSUB Lowpass = 150 Hz at the very right SAT Highpass = Flat Cut-off frequencies Troubleshooting Check this firstTroubleshooting To clean the cabinet Care and MaintenanceCleaning the cabinet Damage of drive unitsRisk of Fire Changing the fuseRecycling used products To change the fuseWarranty Technical specifications Parameter SubPage Page Page All there is

SUB 600 specifications

The Dynaudio SUB 600 is a powerful subwoofer designed to bring an enhanced level of bass performance to home audio systems. Known for its robust build quality and exceptional sound reproduction, the SUB 600 is a versatile choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the Dynaudio SUB 600 is its impressive 18-inch driver, which is engineered to deliver deep, impactful bass across a wide frequency range. This driver utilizes advanced materials, including a specially designed cone and high-stiffness surround, to ensure minimal distortion and maximum clarity at high output levels. This means that whether you're enjoying music or watching an action-packed movie, you can expect a rich and immersive bass experience.

The SUB 600 is powered by a built-in amplifier that delivers a robust output of up to 500 watts RMS, capable of handling the most demanding audio tracks with ease. This amplifier is designed to work seamlessly with the subwoofer's driver, providing the necessary power and control to reproduce low frequencies accurately. The result is a dynamic sound that adds depth and presence to any audio setup.

Dynaudio has also integrated advanced technologies into the SUB 600 to optimize performance. The subwoofer features a sophisticated digital signal processing (DSP) system that allows for precise tuning of the low-frequency response. This ensures that the SUB 600 can adapt to different room acoustics, delivering the best possible bass performance regardless of placement.

Furthermore, the SUB 600 comes with a range of connectivity options, including high-level and low-level inputs. This allows it to easily integrate with various audio systems, from stereo setups to multi-channel home theaters. The inclusion of an adjustable crossover frequency control enables users to fine-tune the integration with their main speakers, ensuring a seamless blend of sound.

In terms of aesthetics, the Dynaudio SUB 600 boasts a sleek design that will fit well into any entertainment environment. It is available in a selection of finishes that can complement your existing decor. With its combination of high-quality materials, advanced technologies, and performance-driven design, the Dynaudio SUB 600 stands out as an exceptional choice for anyone seeking to elevate their audio experience to the next level. Whether for serious music listening or immersive movie watching, the SUB 600 delivers powerful bass that enhances any audio experience.