Dynaudio SUB 600 owner manual Troubleshooting

Page 34

Troubleshooting

Problem

Cause

Solution

 

 

 

The subwoofer switches itself off

There is hardly any low-frequency signal available. This can

The subwoofer will switch on automatically as soon

although music is being played.

happen if the music or movie itself does not contain very low

as low frequent signals are detected.

 

frequencies (e.g. long dialogues).

 

 

 

 

The subwoofer will not switch on at all.

• AC mains cable has become disconnected

Make sure to switch the system off first before

 

(LED does not lit).

making any changes!

 

• Mains switch on the rear is switched to OFF

Reconnect mains cable.

 

(LED does not lit).

 

Switch mains back on.

 

 

 

 

Check if all signal cables are connected properly.

 

 

 

The subwoofer will not switch on

• No signal is present on either of the subwoofer’s inputs

Make sure to switch the system off first before

automatically.

(LED lights red).

making any changes!

 

 

Check if all signal cables are connected properly.

 

 

Check if the subwoofer output on the source is

 

 

engaged.

 

 

 

Subwoofer is switched on but no sound

• No signal is present on either of the subwoofer’s inputs.

Make sure to switch the system off first before

from the subwoofer.

• In the processor or receiver’s bass-management set-up,

making any changes!

 

subwoofer has been disabled.

Check if all signal cables are connected properly.

 

• Subwoofer volume level has been turned down all the way

 

Check settings in Bass Management menu of the

 

on the processor/receiver.

 

connected amplifier or receiver.

 

• Subwoofer volume level has been turned down all the way

 

Carefully and gradually increase the subwoofer

 

with the subwoofer’s control.

 

volume level on the amplifier or receiver.

 

 

 

 

Carefully and gradually increase the subwoofer

 

 

volume level on the subwoofer GAIN control.

 

 

 

Owners Manual

31

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page Contents Page Introduction Important Safety Instructions Supply cord shall remain readily operable Risk of Electric Shock. Do Not OpenVases, should not be placed on this apparatus Qualified personnelGeneral safety sign Used signs and symbolsSafety signs Signal wordsHow this operating manual is structured Text markingsUnpacking Check that the contents are completeTo unpack the subwoofer To remove the grille GrilleTo fit the grille ➎ SUB Lowpass Controls and connections➍ SAT Highpass ➏ SAT/SUB Input, SAT Output➐ SUB I/O, To Slave ➑ LFE/SlaveConnecting the subwoofer Damage of device due to improper connectionSUB I/O LFE/Slave Highpass settingSubwoofer inputs SAT/SUB InputSUB Input Connecting a single subwoofer➊ To connect the SAT/SUB input ➋ To connect the LFE channelMultiple subwoofer connections To connect multiple subwoofersConnecting loudspeakers To connect speakersPower mode Switching the subwoofer on/offAuto Power mode Adjusting the volume Gain High Sound LevelsSelecting the subwoofer cut-off frequency SUB Lowpass To select the cut-off frequencySetting the phase Phase To find the correct phase settingSetting the satellite cut-off frequency SAT Highpass To set the cut-off frequencyPositioning the subwoofer Choose adequate music materialImpact of room-modes Listening RoomNext to wall, away from corner Corner placementPositioning possibilities Free standing, away from wall and cornerUsing multiple subwoofers General tips Volume Gain Cut-off frequenciesSubwoofer too low, main speakers too high Cross-over frequencies set correctlySubwoofer too high, main speakers too low  SUB Lowpass = 80 Hz Control possibilitiesGeneral tips  Reduce weak amplifiers and small speakers from bass loadDamage of Small Satellite Speakers Specific tipsSUB Lowpass = 150 Hz at the very right SAT Highpass = Flat Cut-off frequencies Troubleshooting Check this firstTroubleshooting To clean the cabinet Care and MaintenanceCleaning the cabinet Damage of drive unitsRisk of Fire Changing the fuseRecycling used products To change the fuseWarranty Technical specifications Parameter SubPage Page Page All there is

SUB 600 specifications

The Dynaudio SUB 600 is a powerful subwoofer designed to bring an enhanced level of bass performance to home audio systems. Known for its robust build quality and exceptional sound reproduction, the SUB 600 is a versatile choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the Dynaudio SUB 600 is its impressive 18-inch driver, which is engineered to deliver deep, impactful bass across a wide frequency range. This driver utilizes advanced materials, including a specially designed cone and high-stiffness surround, to ensure minimal distortion and maximum clarity at high output levels. This means that whether you're enjoying music or watching an action-packed movie, you can expect a rich and immersive bass experience.

The SUB 600 is powered by a built-in amplifier that delivers a robust output of up to 500 watts RMS, capable of handling the most demanding audio tracks with ease. This amplifier is designed to work seamlessly with the subwoofer's driver, providing the necessary power and control to reproduce low frequencies accurately. The result is a dynamic sound that adds depth and presence to any audio setup.

Dynaudio has also integrated advanced technologies into the SUB 600 to optimize performance. The subwoofer features a sophisticated digital signal processing (DSP) system that allows for precise tuning of the low-frequency response. This ensures that the SUB 600 can adapt to different room acoustics, delivering the best possible bass performance regardless of placement.

Furthermore, the SUB 600 comes with a range of connectivity options, including high-level and low-level inputs. This allows it to easily integrate with various audio systems, from stereo setups to multi-channel home theaters. The inclusion of an adjustable crossover frequency control enables users to fine-tune the integration with their main speakers, ensuring a seamless blend of sound.

In terms of aesthetics, the Dynaudio SUB 600 boasts a sleek design that will fit well into any entertainment environment. It is available in a selection of finishes that can complement your existing decor. With its combination of high-quality materials, advanced technologies, and performance-driven design, the Dynaudio SUB 600 stands out as an exceptional choice for anyone seeking to elevate their audio experience to the next level. Whether for serious music listening or immersive movie watching, the SUB 600 delivers powerful bass that enhances any audio experience.
Top Page Image Contents