Honeywell How to Mount the CV31, How to Connect a Scanner, Disable Backup Battery Charging

Chapter 1 — About the Computer Features

Disable Backup Battery Charging

If you use the CV31 in a cold environment for an extended period of time, the backup battery temperature may fall below the required temperature for charging (0 °C, 32 °F). To prevent data loss, the default state of the CV31 is to not start if the backup battery does not have sufficient charge. If you need to start a CV31 that has a low battery but is connected to external power in a cold environment, you can disable this setting.

Caution: If the CV31 is disconnected from external power and the backup battery does not have sufficient charge, data may be lost or corrupted.

1Start Intermec Settings.

2Tap Device Settings > Boot Charging Options.

3Select Disable charging during startup.

How to Mount the CV31

Use a Honeywell approved mounting accessory to mount the CV31:

•Desktop Mounting Kit (P/N 805-815-001)

•Vehicle Mounting Kit with a 1.5-inch (C-size) (P/N 805-813-001) or 2.25-inch (D-size) (P/N 805-814-001) RAM ball

•Wall Mounting Kit (P/N VE011-2006)

•Mounting Screw Kit (P/N 213-043-001) to mount the CV31 to an existing 1.5-inch (C-size) or 2.25-inch (D-size) RAM ball

How to Connect a Scanner

You can connect a scanner to the computer with one of these connectors:

•Serial

•USB

Note: Power to the COM ports is disabled when power is not supplied to the CV31 (the vehicle is turned off).

You can also connect a Bluetooth scanner through Bluetooth communications.

12 Thor CV31 Vehicle-Mount Computer User Manual