Honeywell CV31 user manual Configure Static WEP Security with Funk Security

Page 53

Chapter 3 — Configure the Computer

Configure Static WEP Security with Funk Security

Before you set static WEP security with Funk security, you need to enable the radio on your computer and set the date. Intermec recommends that you use WPA2-PSK instead of WEP if possible.

1Start Intermec Settings.

2Select Communications > 802.11 Radio > Funk Security.

3Select a Funk security profile to configure.

4Enter the SSID.

5For Association, select Open.

6For Encryption, select WEP.

7For 8021x, select None.

8Enter an ASCII key or hex key value for each key you want to use (Key 1 through Key 4):

•For 64-bit WEP, enter a 5-byte value: 5 ASCII characters or 0x followed by 5 hexadecimal pairs.

•For 128-bit WEP, enter a 13-byte value: 13 ASCII characters or 0x followed by 13 hexadecimal pairs.

9Select the Transmit key you want to use to transmit data.

10Tap OK.

Use Open (No Security) Associations with Funk Security

To create an open network, you can set no security with Funk security.

1Start Intermec Settings.

2Select Communications > 802.11 Radio > Funk Security.

3Select the active Funk security profile.

4Enter the SSID.

5For Association, select Open.

6For Encryption, select WEP.

7Tap OK.

Thor CV31 Vehicle-Mount Computer User Manual

45

Image 53

Contents Thor CV31 Patents DisclaimerTrademarks Contents Configure the Computer About the User Interface and Installed ApplicationsManage the Computer Troubleshoot and Maintain the Computer SpecificationsDevice Settings Global Services and Support Safety InformationWarranty Information Web Support Before You BeginRelated Documents Who Should Read This ManualSend Feedback Telephone SupportAbout the Computer Features About the Thor CV31 Callout Button Description About the ButtonsCV31 Buttons Configure the Power Button About the Power ButtonAbout the Power Options Power Button ActionsOption Description Power Options MenuConfigure the Power Options Menu About the Ports and ConnectorsPage Callout Connector Description CV31 Ports and ConnectorsCOM1 COM3Status LED Descriptions About the Status LEDsCallout Color DescriptionHow to Supply Power to the CV31 Check the Status of the Backup Battery About the Backup BatteryCV31 Power Supply Options for a New Installation Tap Start Settings Control PanelHow to Connect a Scanner How to Mount the CV31Disable Backup Battery Charging USBCOM Port Default Scanner Model Default Scanner Settings Default COM Port Scanner SettingsAbout Serial Scanners Connect a Serial ScannerAbout USB Scanners Connect a USB Scanner How to Connect a HeadsetMethods to Change the Volume How to Change the VolumeAbout External Antennas Connect an External KeyboardAbout the Bar Code Slot Reader Install an External AntennaSelect Enable Scanner Port Configure the Bar Code Slot ReaderInstall a microSD Card About the Computer Features Accessory Description CV31 AccessoriesCV31 Accessories Screen CV31 Accessories About the User Interface and Installed Applications About the Touch Screen About the User InterfaceAbout Screen Gestures Screen GesturesApplications Installed on the Computer Applications Installed on the ComputerCalibrate the Touch Screen Icon Application DescriptionAbout Launcher for Windows Downloadable Applications for the ComputerAbout HTML5 Browser About SmartSystems About Intermec Terminal EmulatorAbout the User Interface and Installed Applications Configure the Computer About Intermec Settings on the Computer How to Configure the ComputerStart Intermec Settings Data Collection Option Parameters You Can Configure About the Structure of Intermec SettingsCommunications Option Parameters You Can Configure Data Collection MenuDevice Settings Option Parameters You Can Configure Device Settings MenuPrinter Options Parameters You Can Configure Printers MenuDevice Monitor Menu SmartSystems Information MenuLicense Manager Menu Virtual Wedge MenuCore Messaging Service Options Parameters You Can Configure Core Messaging Service MenuRfid Options Parameters You Can Configure Rfid MenuTap Menu Enter Password How to Navigate in Intermec SettingsEnable Intermec Settings Password Select Hide Menu Item Restore Default SettingsHide Menu Items in Intermec Settings About Bluetooth Communications Configure the Computer Remotely with SmartSystemsSelect Start Intermec Settings About Network CommunicationsTap Communications Bluetooth Configure Bluetooth CommunicationsConnect a Bluetooth Scanner with the Quick Connect Bar Code Connect to a Bluetooth Printer Connect a Bluetooth Scanner with the Wireless Scanning AppWEP About Wireless SecurityLoad a Certificate Select Communications 802.11 Radio Funk Security Select a Funk Security ProfileFor Validate Server Certificate, select Yes For Association, select WPA or WPA2For 8021x, select TTLS, PEAP, EAP-FAST, or TLS Configure Leap Security with Funk Security Configure 802.1x Security with Funk SecurityFor Association, select Open For Association, select Open, WPA, WPA2, or Network EAPUse Open No Security Associations with Funk Security Configure Static WEP Security with Funk SecurityConfigure the Computer Manage the Computer How to Manage the Computer with SmartSystems How to Manage the Computer in Your NetworkHow to Manage the Computer with CloneNGo How to Package Your Application How to Develop and Install ApplicationsHow to Manage the Computer with Third-Party Software Install Applications with Microsoft Synchronization Software Install Applications with SmartSystemsHow to Launch Applications Automatically Install Applications with a microSD CardInstall Applications with a USB Device Update the Computer with SmartSystems How to Update the System SoftwareUpdate the Computer with a microSD Card Manage the Computer Troubleshoot and Maintain the Computer Wi-Fi Connection Problems How to Troubleshoot the ComputerWi-Fi Connection Problems and Possible Solutions Problem Possible Solution802.1x Security Problems How to Check Wi-Fi Network StatusISpyWiFi Tabs 802.1x Security Problems and Possible Solutions802.1x Security Problems and Possible Solutions Problems Reading Bar Codes Problems Reading Bar CodesScanner Settings . Make sure Go to Data CollectionData Collection Symbologies for Problems Using the Computer Problems Using the ComputerFind Your Operating System Version Find Your Configuration NumberCall Product Support Clean the Computer How to Restart the ComputerReboot the Computer Reset the ComputerTroubleshoot and Maintain the Computer Specifications Physical Dimensions Physical and Environmental SpecificationsSpecification Measure Power and Electrical SpecificationsBar Code Symbologies Screen SpecificationsKeyboard Options EAN/UPCMSI Pin AssignmentsCOM 1 and COM 3 Ports USB Port Pin Signal DescriptionCOM 1 and COM 3 Port Pin Assignments USB Port Pin AssignmentsPower Connector Pin Assignments Power ConnectorDevice Settings Default Configuration Default ConfigurationData Collection Settings Symbology SettingsSymbology Option Default Value Symbology Option SettingsScanner Setting Default Value Scanner SettingsImager Settings Imager Setting Default ValueApplication Connection Settings Decode Security SettingsRfid Settings Reader 1 Setting Default Value Reader 1 SettingsRfid Module Settings Rfid Module Setting Default ValueRadio Settings Communications SettingsFunk Security Settings CommunicationsIP Settings Default Value Ethernet Adapter SettingsEAP/MD5 CckmBluetooth Settings Device SettingsDevice Settings Power Management SettingsScreen Settings Core Messaging ServiceCore Messaging Service Settings Device Monitor SettingsVirtual Wedge Setting Default Value Virtual Wedge SettingsVirtual Wedge Read Report = EventHoneywell Scanning & Mobility