Dynaudio pmn manual Setup Menu, Set Monitor Task, External Clock, Calibrate Monitor

Page 21

Air_US_rev_111.qxd 16-12-2004 14:16 Page 19

PARAMETER DESCRIPTION

Setup Menu

• Press ENTER to access sub-menus

Set Monitor Task

For the System Controller - Master monitor to identify and operate all monitors in the setup, each monitor must be given one of the following tasks indicating function and position.

Press ENTER to access task options

Use ARROW keys to select task

Press ENTER to confirm selected task

Following tasks can be given:

Setup

Press ENTER to enter select mode. Select mode is indicated by “ * ”

Press ENTER to confirm choice

Empty:

No selection

Custom:

For future configuration

Stereo analog:

Two monitor stereo setup with analog* Inputs selected.

No Task

C Sur

L Front

L SUB

R Front

R SUB

Center

LS Chain

(C) SUB

RS Chain

L Sur

L Inner

R Sur

R Inner

 

Custom 1-4

Reserved for future use

Stereo Digital:

Two monitor stereo setup with digital Inputs selected.

5.1 Analog:

5.1 setup with analog* Inputs selected.

5.1 Digital

5.1 setup with digital Inputs selected.

6.1 Analog

5.1Setup + Center surround on a separate channel gives the 6.1 setup.

6.1 Digital

5.1Setup + Center surround on a separate channel gives the 6.1 setup.

5.3 Analog

Analog setup with 5 monitors and 3 subs

5.3 Digital

Digital setup with 5 monitors and 3 subs

*Analog Inputs are only available with an optional analog card installed.

5.1 Digital/6 Master

5.1Setup using one Master with optional Digital I/o card installed, 4 slave monitors (or masters set as slave) and 1 sub.

External Clock

• Press ENTER to access sub-menus

BNC Sync On:

The monitor attempts to lock on the Word Clock BNC.

BNC Sync Off:

The monitor will attempt to lock on the AES Input.

Calibrate Monitor

Press ENTER

Select monitor to calibrate using the ARROW keys

Press ENTER

19

Image 21
Contents AirUSrev111.qxd 16-12-2004 1414 AirUSrev111.qxd 16-12-2004 1414 Voltage Line plug according to standard Important Safety InstructionsQuick Setup Reference AirUSrev111.qxd 16-12-2004 1415 Page c Table of Contents This Manual IntroductionBreak Product ConceptCommon Features Remote ControlMaster Unit Slave & Sub UnitsMaster Unit Analog I/O Rear Panel Description MasterSlave/Sub Optional Digital I/O cardMain Display Operational OverviewAIR Display & Setting UP Setting up IntroductionGeneral Setup Procedure Stereo Setup SetupsStereo Setup with mono Subs Stereo Setup with stereo SubsAnalog Setup Digital SetupThis illustration shows how to connect a 5.1 digital setup This illustration shows how to connect a 5.1 analog setupThis illustration shows how to connect a 5.3 Analog setup This illustration shows how to connect a 5.3 Digital setupDig/6 Master This illustration shows how to connect a 6.1 Analog setupOther Chained Setups Stereo Setup With Chains on L & RDigital 192 kHz Digital Setup Overview When the Monitors are ConnectedParameter Description Press Enter to access the Select ModeBasic operation in all menus Main DisplaySetup Setup MenuSet Monitor Task External ClockLFE channel note Presets In GeneralRecall StorePlacing the Monitors Close to wall / Wall On the bridge / ConsoleOther situations Checking by ear when listening to the signals In phase Phase checkingEvaluation Checking the placingNext EqualizingCurves Calibrating Main MonitorsInterchannel calibration Acoustic level calibrationPlacing the Subwoofer Evaluation Low frequency sweepsTo Calibrate Checking summing phase cancellationControlling standing waves Checking the CrosspointPhase LFE GainPolarity Acoustics Good acousticsReverberation time Sabines formula Diffusers AbsorbersMembrane absorbers Absorbtion or diffusion ? Resonance absorbersStanding Waves Background Info AcousticsAxial Tangential Radial Room modesHow does the standing waves influence the sound field? How to prohibit standing wavesAcoustics Background Info Comb Filtering Dip frequencies Or +Rear wall cancellation Subwoofer Subwoofer Background InfoLFE Channel Subwoofer & LFE Channel Background InfoCross-overs Low Pass LFE GainDelaying Monitors LINE-UP & Calibration Acoustic summation of audio signalsCinema set-up How to measure the sound pressure? LINE-UP & Calibration Background InfoCalibration of 5.1 in an ITU-775 arrangement Remote Control Features AIR RemoteIntroduction Volume potentiometer Preset 1/3 and 2/4 keysREF Level 1-3 keys Shift keyNavigating AIR Soft AIR SoftTools MainNetwork Preset ListSystem Setup Chained monitors Calibrate AIR BaseMiscellaneous Reset ProceduresGlobal Parameters Local ParametersTC Link Standard Cat-5 cables CablesAES/EBU Standard cables Serial to Cat-5 cableAIR 20 & AIR 25 Master and Slave AIR 6 & AIR 15 Master and SlaveAIR Base-1 & AIR Base-2 Room & DistanceGeneral for all Products AIR Remote AIR Remote specsError messages etc Delay in System & Error Messages ETCCertificate of Conformity Certificate Of ConformityAIR # Name Preset List

pmn specifications

Dynaudio, a company renowned for its high-fidelity audio products, has made significant strides in the field of professional monitoring through its PPM (Professional Precision Monitoring) series. Among the standout models in this series is the Dynaudio PMN (Professional Monitoring Nearfield), which has garnered attention for its outstanding sound quality, precise technical performance, and sophisticated design.

One of the key features of the Dynaudio PMN monitors is their advanced driver technology. Equipped with proprietary drivers, the PMN series employs custom-designed woofers and tweeters that deliver an incredibly accurate frequency response. The woofers utilize a lightweight diaphragm, ensuring that low frequencies are produced with power while maintaining clarity. The tweeters, known for their soft dome design, excel in reproducing high frequencies with exquisite detail and minimal distortion, making the listening experience both immersive and enjoyable.

In terms of design, the PMN monitors boast a sleek and modern aesthetic that fits seamlessly into any studio environment. The cabinet construction employs advanced materials and techniques that minimize resonance, thus reducing unwanted coloration in sound. The unique curved shape of the cabinets is not only visually appealing but also supports optimal acoustic performance by enhancing sound dispersion.

Another notable characteristic of the Dynaudio PMN is its versatility. The monitors are equipped with multiple inputs, allowing for seamless integration into various set-ups, whether in a professional studio or a home listening environment. This flexibility is further complemented by adjustable bass and treble controls, empowering users to tailor the sound profile to their specific requirements.

Dynaudio has also incorporated advanced technologies such as room correction in certain PMN models, which enables precise calibration according to the acoustics of the room. This feature ensures that audio professionals can rely on consistent and accurate sound reproduction regardless of their monitoring environment.

Overall, the Dynaudio PMN series represents a blend of pioneering audio technology, meticulous craftsmanship, and user-focused design. For professionals seeking precise monitoring solutions for music production, film scoring, or any audio-related projects, the Dynaudio PMN monitors provide an exceptional listening experience that stands the test of time. With their stellar performance and innovative features, these monitors have become a top choice for sound engineers, musicians, and audio enthusiasts alike.