Dynaudio pmn manual AIR 6 & AIR 15 Master and Slave, AIR 20 & AIR 25 Master and Slave

Page 55

Air_US_rev_111.qxd 16-12-2004 14:18 Page 53

AIR TECHNICAL SPECIFICATIONS

AIR 6 & AIR 15 (Master and Slave)

Model

AIR 6

AIR 15

System

Two-way Active Nearfield Monitor

Two-way Active Nearfield Monitor

Frequency response (+/- 3 dB)

40 Hz – 22 kHz

33 Hz – 22 kHz

Peak SPL 1m, pair (IEC Short Term)

> 128 dB peak

> 128 dB peak

Peak SPL 2m, 5.1 (IEC Short Term)

> 126 dB peak

> 126 dB peak (no LFE)

Max SPL 1m, (IEC Long Term)

104 dB RMS

103 dB RMS

Precision of monitor matching

+/- 0.2 dB

+/- 0.2 dB

Port tuning frequency

45 Hz

40 Hz

Internal cabinet volume

12.1 liters

27 liters

Bass principle

Bass reflex

Bass reflex

Crossover frequency

2150 Hz (DSP generated)

2150 Hz (DSP generated)

Crossover slope

24 dB/oct (Linkwitz Riley, DSP generated)

24 dB/oct (Linkwitz Riley, DSP generated)

Tweeter

Esotec 28 mm / 1.1" soft dome, rear chamber, magnetic fluid,

Esotec 28 mm / 1.1" soft dome, rear chamber, magnetic fluid,

 

4mm die-cast alu front, pure alu wire voice coil

4mm die-cast alu front, pure alu wire voice coil

Woofer

175 mm / 6.5", one-piece molded polyprop cone, 75 mm / 3"

240 mm / 10", one-piece molded polyprop cone, 100 mm / 4"

 

pure alu voice coil, magnetic shielded

pure alu voice coil

Mains voltage

100 to 240 VAC, 50 to 60 Hz (auto-select)

100 to 240 VAC, 50 to 60 Hz (auto-select)

Power consumption

40 W @ 1/8 max power (IEC 60065)

40 W @ 1/8 max power (IEC 60065)

 

 

 

Finish

 

 

Amp

Black anodized aluminum back plate

Black anodized aluminum back plate

Cabinet

Dark gray MDF baffle, Silver foil

Dark gray MDF baffle, Silver foil

Dimensions (H x W x D)

338 x 216 x 345mm / 13,3” x 8,5” x 13,6”

425 x 275 x 395mm / 16,7” x 10,8” x 15,5”

Weight

9.8 kg / 21.8 lbs

15.5 kg / 34.5 lbs

 

 

 

Amplifier

 

 

Tweeter and woofer

Tweeter 200 W PWM amp/Woofer 200 W PWM amp

Tweeter 200 W PWM amp/Woofer 200 W PWM amp

 

 

 

AIR 20 & AIR 25 (Master and Slave)

Model

AIR 20

AIR 25

System

Three-way Semiactive Nearfield Monitor

Three-way Active Nearfield Monitor

Frequency response (+/- 3 dB)

31 Hz –22 kHz: +/- 3dB

28 Hz –22 kHz: +/- 3dB

Peak SPL 1m, pair (IEC Short Term)

131 dB peak

134 dB peak

Peak SPL 2m, 5.1 (IEC Short Term)

129 dB peak

132 dB peak

Max SPL 1m, (IEC Long Term)

104 dB RMS

107 dB RMS

Precision of monitor matching

+/- 0.2 dB

+/- 0.2 dB

Port tuning frequency

40 Hz

35 Hz

Internal cabinet volume

35 liters

68 liters

Bass principle

Bass reflex

Bass reflex

Crossover frequency

390 Hz (DSP generated) and 2600 Hz

400 Hz (DSP generated) and 2400 Hz (DSP generated)

Crossover slope

12 dB/oct and 6 dB/oct

 

Tweeter

Esotar 28 mm / 1.1” soft dome, neodymium magnet, rear chamber,

Esotar 28 mm / 1.1” soft dome, neodymium magnet, rear cham-

 

magnetic fluid, 4mm steel front, pure alu wire voice coil

ber, magnetic fluid, 4mm steel front, pure alu wire voice coil

Midrange

145 mm / 5,5", one-piece molded polyprop cone, 38 mm / 1,5"

145 mm / 5,5", one-piece molded polyprop cone, 38 mm / 1,5"

 

pure alu voice coil

pure alu voice coil

Woofer

240 mm / 9,5", one-piece molded polyprop cone, 100 mm / 4"

2x240 mm / 9,5", one-piece molded polyprop cone, 100 mm /

 

pure alu voice coil

4" pure alu voice coil

Mains voltage

100 to 240 VAC, 50 to 60 Hz (auto-select)

100 to 240 VAC, 50 to 60 Hz (select)

Power consumption

45 W @ 1/8 max power (IEC 60065)

45 W @ 1/8 max power (IEC 60065)

 

 

 

Finish

 

 

Amp

Black painted back plate

Black painted back plate

Cabinet

Black ash with dark gray MDF baffle

Black ash with dark gray MDF baffle

Dimensions (H x W x D)

575 x 310 x 395 mm / 22,6” x 12,2” x 15,5”

510 x 535 x 450 mm /20” x 21” x 17,7”

Depth incl. amp and driver:

435mm / 17,0”

490mm / 19,3”

Weight

28 kg / 62.2 lbs

46 kg / 101 lbs

 

 

 

Amplifier

 

 

Tweeter, midrange and woofer

Tweeter & Midrange 200 W amp/Woofer 200 W amp

Tweeter 300 W amp/Midrange 300 W amp/Woofer 2x300 W amp

 

 

 

53

Image 55
Contents AirUSrev111.qxd 16-12-2004 1414 AirUSrev111.qxd 16-12-2004 1414 Voltage Line plug according to standard Important Safety InstructionsQuick Setup Reference AirUSrev111.qxd 16-12-2004 1415 Page c Table of Contents Product Concept IntroductionThis Manual BreakSlave & Sub Units Remote ControlCommon Features Master UnitOptional Digital I/O card Rear Panel Description MasterMaster Unit Analog I/O Slave/SubMain Display Operational OverviewSetting up Introduction AIR Display & Setting UPGeneral Setup Procedure Stereo Setup with stereo Subs SetupsStereo Setup Stereo Setup with mono SubsThis illustration shows how to connect a 5.1 analog setup Digital SetupAnalog Setup This illustration shows how to connect a 5.1 digital setupThis illustration shows how to connect a 5.3 Analog setup This illustration shows how to connect a 5.3 Digital setupDig/6 Master This illustration shows how to connect a 6.1 Analog setupOther Chained Setups Stereo Setup With Chains on L & RDigital 192 kHz Digital Setup Overview When the Monitors are ConnectedMain Display Press Enter to access the Select ModeParameter Description Basic operation in all menusExternal Clock Setup MenuSetup Set Monitor TaskStore Presets In GeneralLFE channel note RecallPlacing the Monitors On the bridge / Console Close to wall / WallOther situations Checking the placing Phase checkingChecking by ear when listening to the signals In phase EvaluationNext EqualizingAcoustic level calibration Calibrating Main MonitorsCurves Interchannel calibrationPlacing the Subwoofer Evaluation Low frequency sweepsChecking the Crosspoint Checking summing phase cancellationTo Calibrate Controlling standing wavesLFE Gain PhasePolarity Good acoustics AcousticsReverberation time Sabines formula Absorbtion or diffusion ? Resonance absorbers AbsorbersDiffusers Membrane absorbersStanding Waves Background Info AcousticsAxial Tangential Radial Room modesHow does the standing waves influence the sound field? How to prohibit standing wavesAcoustics Background Info Comb Filtering Dip frequencies Or +Rear wall cancellation Subwoofer Subwoofer Background InfoLow Pass LFE Gain Subwoofer & LFE Channel Background InfoLFE Channel Cross-oversAcoustic summation of audio signals Delaying Monitors LINE-UP & CalibrationCinema set-up LINE-UP & Calibration Background Info How to measure the sound pressure?Calibration of 5.1 in an ITU-775 arrangement AIR Remote Remote Control FeaturesIntroduction Shift key Preset 1/3 and 2/4 keysVolume potentiometer REF Level 1-3 keysNavigating AIR Soft AIR SoftTools MainNetwork Preset ListSystem Setup Chained monitors Calibrate AIR BaseLocal Parameters Reset ProceduresMiscellaneous Global ParametersSerial to Cat-5 cable CablesTC Link Standard Cat-5 cables AES/EBU Standard cablesAIR 20 & AIR 25 Master and Slave AIR 6 & AIR 15 Master and SlaveRoom & Distance AIR Base-1 & AIR Base-2General for all Products AIR Remote AIR Remote specsError messages etc Delay in System & Error Messages ETCCertificate Of Conformity Certificate of ConformityAIR # Name Preset List

pmn specifications

Dynaudio, a company renowned for its high-fidelity audio products, has made significant strides in the field of professional monitoring through its PPM (Professional Precision Monitoring) series. Among the standout models in this series is the Dynaudio PMN (Professional Monitoring Nearfield), which has garnered attention for its outstanding sound quality, precise technical performance, and sophisticated design.

One of the key features of the Dynaudio PMN monitors is their advanced driver technology. Equipped with proprietary drivers, the PMN series employs custom-designed woofers and tweeters that deliver an incredibly accurate frequency response. The woofers utilize a lightweight diaphragm, ensuring that low frequencies are produced with power while maintaining clarity. The tweeters, known for their soft dome design, excel in reproducing high frequencies with exquisite detail and minimal distortion, making the listening experience both immersive and enjoyable.

In terms of design, the PMN monitors boast a sleek and modern aesthetic that fits seamlessly into any studio environment. The cabinet construction employs advanced materials and techniques that minimize resonance, thus reducing unwanted coloration in sound. The unique curved shape of the cabinets is not only visually appealing but also supports optimal acoustic performance by enhancing sound dispersion.

Another notable characteristic of the Dynaudio PMN is its versatility. The monitors are equipped with multiple inputs, allowing for seamless integration into various set-ups, whether in a professional studio or a home listening environment. This flexibility is further complemented by adjustable bass and treble controls, empowering users to tailor the sound profile to their specific requirements.

Dynaudio has also incorporated advanced technologies such as room correction in certain PMN models, which enables precise calibration according to the acoustics of the room. This feature ensures that audio professionals can rely on consistent and accurate sound reproduction regardless of their monitoring environment.

Overall, the Dynaudio PMN series represents a blend of pioneering audio technology, meticulous craftsmanship, and user-focused design. For professionals seeking precise monitoring solutions for music production, film scoring, or any audio-related projects, the Dynaudio PMN monitors provide an exceptional listening experience that stands the test of time. With their stellar performance and innovative features, these monitors have become a top choice for sound engineers, musicians, and audio enthusiasts alike.