Dynaudio pmn manual AIR Base-1 & AIR Base-2, Room & Distance, General for all Products

Air_US_rev_111.qxd 16-12-2004 14:18 Page 54

	AIR TECHNICAL SPECIFICATIONS
AIR Base-1 & AIR Base-2
System:	Active Subwoofers
Total frequency response:	25 Hz – bssmng: 120 Hz, LFE: 2.5 kHz/
	23 Hz – bssmng: 120 Hz, LFE: 2.5 kHz : +/-3dB
Max. SPL 1m, one (IEC Short Term)	119 dB peak / 121 dB peak
Max. SPL 2m, 5.1 (IEC Short Term)	113 dB peak / 115 dB peak (no front, rear & center)
Precision of monitor matching:	+/- 0.2 dB
Port tuning frequency:	30 Hz / 27 Hz
Internal cabinet volume:	37 liters / 78 liters
Bass principle:	Bass reflex
Woofer:	1 / 2 pcs. 240 mm / 10", one-piece molded polyprop cone, 100
	mm / 4" pure alu voice coil
Mains voltage:	100 to 240 VAC, 50 to 60 Hz (auto-select)
Power consumption:	40 W @ 1/8 max power (IEC 60065)
Finish
Amp:	Black anodized aluminum back plate
Cabinet:	Dark gray MDF baffle, Silver foil
Dimensions (H x W x D):	310 x 480 x 420mm / 900 x 310 x 420mm
	(12.2” x 18,9” x 16.5” / 35.4” x 12.2” x 16.5”)
	Depth incl. amp and driver: 447mm / 447mm (17.6” / 17.6”)
Weight:	18 kg / 29 kg (39.6 lbs / 63.8 lbs)
Amplifier	250 W PWM amp

Room & Distance

Typical listening distance
AIR 6	AIR 15	AIR 20	AIR 25
1.2-2 m / 4-7 ft	1.5-2.5 m / 5-8,5 ft	1.5-3 m / 5-10.2 ft
Typical room size
AIR 6	AIR 15	AIR 20	AIR 25
50-100 m3 / 1600-3500 ft	75-125 m3 /2600-4400 ft	80-130 m3 / 2800-4600 ft3
AIR Base-1	AIR Base-2	Two or three AIR Base-1’s	Two or three AIR Base-1’s
30-60 m3 / 1000-2000 ft3	50-100 m3 / 1600-4400 ft3	50-100 m3 / 1600-3500 ft3	75-125 m3 / 2600-4400 ft3

General specifications for AIR 6, AIR 15, AIR 20, AIR 25, AIR Base-1 & AIR Base-2

System sample rates
Internal sample rate	192 and 176.4 via Dual Wire (optional Digital Card required) and
	96, 88.2, 64, 48, 44.1 or 32 kHz
AIR Masters only
I/O Connectors	XLR (2 channels AES/EBU in) 3 x RJ45 proprietary TC LINK
Formats	AES/EBU (24 bit)
Word clock input	BNC, 75 ohm, 0.6 to 10 Vpp
Display	2 x 16 character dot matrix
Operation	Menu system / four buttons
Analog input option
Input connectors	XLR balanced (pin 2+, pin 3-)
Impedance	10/3 k Ohm (Balanced/unbalanced)
Selectable full scale input level	+9, +15, +21, +27 dBu
Dynamic Range	> 113 dB typ. (unweighted), BW: 20-20kHz
THD+N	< -105 dB typ. @ 1 kHz, -3 dBFS
Crosstalk	< -120 dB, 20 Hz to 20 kHz
A to D Conversion	24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
AIR Slaves only
I/O Connectors	2 x RJ45 proprietary TC LINK

General for all Products

EMC complies with:	EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
Safety certified to:	IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE
	#LR108093
Environment operating Temperature:	32° F to 122° F (0° C to 50° C)
Storage Temperature:	-22° F to 167° F (-30° C to 70° C)
Humidity:	Max. 90 % non-condensing
Warranty	2 years on parts and labor

54