Load Flash Resource | &%STLxxxxxyyyyyyzdd....dd |
&%STL | Lead in sequence |
xxxxx | Resource number in decimal, must be 5 digits |
yyyyyy | Byte count of resource file in Hex, must be 6 positions |
z | Format of the resource file |
| S = Single byte binary format |
| D = Double byte text format |
dd...dd | Flash resource file. e.g. forms overlay, signatures etc. |
Resource number values may be between 00001 to 32767. Values of 10000 and above are password protected and will require the user to enter MICR mode with a valid password before they can be unlocked with the STP command. Values below 10000 will be unsecured.
Resource number 5001 is reserved for the Audit Trail overlay, see chapter 7.
Format Flash Memory | &%SFF$ |
&%SFF | Lead in sequence |
$ | Command terminator |
This command formats flash memory. A valid password command must precede this command.
Caution: All flash contents will be lost. This includes all electronic forms, signatures, logos, etc.
Secure Flash Resource Unlock Command | &%STPxxxxx$ | |
&%STP | Unlock flash resource command | |
xxxxx | Flash resource number, must be 5 digits | |
$ | Command terminator |
|
Unlocks a secure flash resource. |
|
Tray Lock Command | &%STTL#$ |
&%STTL | Lock tray command |
# | The tray to be locked (choose from 1, 2 or 3 only) |
$ | Command terminator |
This command prevents other applications from accessing a particular printer paper tray.
Secure MICR Printer User’s Guide | 22 | © Source Technologies |
September 2005 | All Rights Reserved |