Atari XL manual Last Word 3.0 Reference Manual

The Last Word 3.0 Reference Manual

	<[n]text>		Define running footer to be printed at the bottom of each page.
			<n> is an OPTIONAL offset, in lines, from the bottom page
			margin, and should be typed in inverse video immediately before
			the text of the footer. For example:
			f3	Footer<Return>
			Will print the running footer “Footer” 3 lines below the last line of
			the printed page. Actual footer text should be in normal video,
			except where Stage 2 formatting commands appear (Stage 1
			commands cannot appear in headers or footers), and must end
			with a <Return>. Use the		symbol to print the page number. A
			footer or header can consist of up to 8 lines, each terminated by a
			<Return>. These lines must each be preceded by the symbol
			and must be defined on consecutive lines. If the footer is
			redefined elsewhere in the text, the lines already defined are
			discarded. To get rid of a footer, just include <Return> in your
			text.
		<n>	Get text bank. Should be on a line on its own, followed by
			<Return>. The contents of the text bank will be read and printed in
			place of the command.
		<fspec>	Get file from disk. This command should be on a line on its own,
			terminated by a <Return>. The contents of the file will be read and
			printed in place of the command. This works very quickly, even
			when reading a file from disk, because a double-buffering system
			is used to eliminate slow single-byte read commands.
			Any formatting commands in the included files will be carried out.
			The advantage that this method has over the link commands of
			many word processors is that the same file will be in the edit
			buffer after printing. You can have a main file with include
			statements and using the "where's the cursor?" command and
			print preview, always see the correct pagination. Note that due to
			memory constraints on buffering this command is NOT nestable,
			i.e. an included file may NOT in turn include another, although an
			included BANK may include a FILE.
		<n/text>	This defines a running header to be printed at the top of each
			page, and works identically to the ooter command. The optional
			number specifies the offset from the top of the page, and the
			default value is 2.
			Justify text left. All text following this command will be aligned with
			the left margin.
			Justify text right. All text following this command will be aligned
			with the right margin.
jc			Justify centre. All following text will be centred on the page.
			Justify fully. All following text will be aligned flush with both the left
			and right margins.
			5-29