THE
February 2007
Hi/Low Manual | This setting allows you to choose | If the box is checked, the |
Rekey | how you will verify a high or low | |
| manual reading. There are two | you to reenter the manual |
| methods for manual reading | reading to verify it is correct. |
| verification: reentering the reading, | If the box is not checked, the |
| or visually verifying the reading. If | |
| you choose to reenter the reading, | reading is correct. If it is, |
| the | press the Yes button. If it |
| exact match to the original manual | does not match the odometer, |
| reading to verify the reading. If you | press the NO button. |
| choose to visually verify the |
|
| reading, the |
|
| if the entered reading is correct. |
|
| You visually compare the reading |
|
| with the register odometer and enter |
|
| your response. |
|
Manual Route | When checked, the | We strongly suggest that this |
Advance | will not move to the next account | setting be left unchecked. If |
| automatically. All changes of | the setting is checked and you |
| accounts must be done manually. | do not realize it is checked, |
|
| the resulting operation of the |
|
| |
|
| the unit is malfunctioning. |
Three controls for | The field sets the default manual | If the direction on the button |
manual meter | reading entry direction for each of | is not the direction you’d like |
readings for the | the supported services. When the | to use, press the button to |
three possible | button shows | switch the direction to the |
services (usually | reading entry direction is Right to | other value. |
water, gas, and | Left. When the button shows |
|
electric) | the default reading entry direction is |
|
| Left To Right. |
|
Read Screen | When checked, the messages from | If you wish to see these |
Show Comments | the office to the meter reader for a | messages, check the box. |
| particular meter will be shown on | However, if you are reading |
| the read screen when that meter is | meters from a vehicle, the |
| displayed. | messages may not apply and |
|
| will definitely slow the |
|
| reading process. In that |
|
| event, you may wish to clear |
|
| the box. |
Show Zero | When checked, the | If you wish to see these |
Consumption | will compare the current reading | messages, check the box. |
| with the previous reading and alert |
|
| you to possible stopped meters. |
|
|
|
|
Page 51 of 73