3.3PCMCIA
Memory Flash Cards are inserted and ejected in much the same way as diskettes.
To insert a Flash Memory card, align the card with the socket and slide the card into the socket until it locks into place. Take note that some FlashMemory cards must be properly configured thorugh the operating system before they can be used for data storage. (See the Flash Memory card manual for details.)
To eject a Flash Memory card, first ensure that the panel PC is not accessing the memory card or device. Then press the appropriate eject button on the socket.
PCMCIA
Eject Button
Figure 3.2 Inserting and ejecting a PCMCIA card
3.4PS/2 Mouse and Keyboard
To install a
1.Be sure the panel PC is turned off.
2.Attach the keyboard to the purple colored
3.Attach the PS/2 mouse to the green colored port.
4.Turn on the panel PC.
Chapter 3 Using the Panel PC
15 |