Advantech PPC-155T user manual Product Warranty 2 years, Declaration of Conformity

Page 3

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur- chase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal, and list any onscreen messages when the problem occurs.

2.Call your dealer and describe the problem. Please have the manual, product, and any helpful information readily available.

3.If the product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from the dealer. This allows Advantech to process the return more quickly.

4.Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.

5.Write the RMA number visibly on the outside of the package and ship it prepaid to the dealer.

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.

CE

This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo- sure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

iii

PPC-155T User Manual

Image 3
Contents PPC-155T Copyright Acknowledgements Declaration of Conformity Product Warranty 2 yearsFCC Class B Technical Support and AssistancePacking List Document FeedbackContact information Additional Information and AssistanceSafety Instructions Wichtige Sicherheishinweise Safety Precaution Static Electricity Page Chapter Using the Panel PCAppendix B Appendix aChapter Specifications General InformationIntroduction General Information Certifications Dimensions of PPC-155T DimensionsPage System Setup Quick Tour of the Panel PC System SetupSystem Setup Installation Procedures Running the Bios Setup ProgramPreparing for First-time Use Installing the Drivers Installing System SoftwarePage Using the Panel PC CD-ROM Drive optional Using the Panel PCPS/2 Mouse and Keyboard PcmciaPCI bus expansion PCI Bus ExpansionSerial COM Ports VGA PortUSB Ports Audio Interface EthernetFront Bezel LED and Light Sensor Touchscreen Optional Page Hardware Installation Hardware Installation Jumpers and ConnectorsDisassembling the Panel PC Hardware Installation PPC without the Rear Cover Installing the 2.5 Hard Disk DrivePlugging in the Eide cable Placing the CPU in the socket Installing the Central Processing Unit CPUTightening the screws on the CPU 11 Fastening the CPU module to the motherboard 12 Placing the memory module in the Dimm Installing the DDR Sdram Memory ModulePage Jumpers Connectors Setting jumpers Jumpers & ConnectorsJumpers & Connectors Jumper and Connector Locations Connectors Page Driver Installation Driver Installation Driver InstallationUpdating Driver Searching on the Advantech Website Appendix a Disassembly Procedure Appendix a DisassemblyAppendix a Disassembly Figure A.4 The PPC without the rear cover Figure A.6 Unfastening the middle plate Figure A.8 Unfastening the HDD module Figure A.10 Disconnecting the HDD cable Figure A.12 Loosening the screws on the CD-ROM module Figure A.14 Removing the fixed brace Figure A.16 Removing the CD-ROM / Pcmcia slot cover Figure A.18 Disconnecting the CD-ROM connector Figure A.20 Unfastening the CPU socket Figure A.22 Removing the Sdram module Page Appendix B Appendix B PCI Card Size Limits Figure B.1 PCI Card Dimensional Limits