2Remove the blank drive module or the drive currently installed.
m If there is no drive installed, press the handle of the blank drive module so that it pops out, then pull the blank drive module out of the front panel.
Security lock
Press the handle on the blank drive module until the handle pops out and then pull the module out.
mIf there is a drive module already in the bay:
a Make sure the drive currently in the bay is not part of a RAID set, or you could lose data.
b Press the handle on the front of the drive module so that the handle pops out. c Grasp the handle and pull the drive module out of its bay and set it aside.
Security lock
Press the handle on the drive module until the handle pops out and then pull the module out.
3Press to open the handle of the replacement drive module (if necessary) and slide it into the empty bay until the module is firmly seated.
50 Chapter 6