Follow these steps to replace a cooling module.
1Press the two latches on the front of the cooling module apart and use them to pull the unit out of the system. If the latches have small tabs on the inside surface, slide those tabs toward you to open the latches fully.
Push the two latches on the cooling module outward to release it and then pull the module out of the unit.
2Remove the packaging from the new cooling module. Hold the unit by the latches and carefully slide it into the system until it clicks into place.
Make sure the cooling module engages the plastic guides on the inside of the unit.
Push the cooling module into the unit and squeeze the two latches together to seat the module.
3Press in the two latches to seat the module in the system. If the latches have small tabs on the inside, slide the tabs away from you and then close the tabs.
Note: Keep the packaging and the old cooling module. You will need to return the failed component to Apple when you receive a replacement.
Installing or Replacing Components | 53 |