A P P E N D I X
B
Safety, Maintenance, and Ergonomics
Important Safety Information
For your own safety and that of your equipment, always take the following precautions.
Important The only way to disconnect power completely is to unplug the two power cords. Make sure at least one end of each power cord is within easy reach so that you can unplug the Xserve RAID when you need to.
Disconnect the power plugs (by pulling the plug, not the cord) if any of the following conditions exists:
mthe power cord or plug becomes frayed or otherwise damaged
myou spill something into the case
myour Xserve RAID system is exposed to rain or any other excess moisture
myour system has been dropped or the case has been otherwise damaged
myou want to clean the case (use only the recommended procedure described later)
Be sure that you always do the following:
mKeep your system away from sources of liquids, such as washbasins, bathtubs, shower stalls, and so on.
mProtect your system from dampness or wet weather, such as rain, snow, and so on.
mRead all the installation instructions carefully before you plug your system into a wall socket or power strip.
mKeep these instructions handy for reference by you and others.
mFollow all instructions and warnings dealing with your system.
Electrical equipment may be hazardous if misused. Operation of this product, or similar products, must always be supervised by trained personnel. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables.
This system is certified as a component for use only with equipment for which the suitability of the combination has been determined by a Nationally Recognized Testing Laboratory.
87