Acnodes RMC 7182 Chassis, Weight, System Cooling, System Input Requirements, Power Supply

Page 103

RMC 7182

1U Rackmount System

Chassis

Model: SC113MTS-560C (1U Rackmount)

Dimensions: (WxHxD) 17.2 x 1.7 x 20 in. (437 x 43 x 508 mm)

Note: please visit our web site for information on supported operating systems

Weight

Gross Weight: 33 lbs. (15 kg.)

System Cooling

4 x 4-cm high performance fans

System Input Requirements

AC Input Voltage: 100-240V AC auto-range

Rated Input Current: 6.5A (100V) to 2.6A (240V)

Rated Input Frequency: 50 to 60 Hz

Power Supply

Rated Output Power: 560W

Rated Output Voltages: +5V (20A), +3.3V (20A), +12V (46.5A), +5Vsb (4A), -12V (0.5A)

Operating Environment

Operating Temperature: 10º to 35º C (50º to 95º F)

Non-operating Temperature: -40º to 70º C (-40º to 158º F)

Operating Relative Humidity: 8% to 90% (non-condensing)

Non-operating Relative Humidity: 5 to 95% (non-condensing)

Regulatory Compliance

Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/- 3-3, CISPR 22 Class A

Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-

4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11)

Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA andCanada), CE Marking (Europe)

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. "Perchlor- ate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate"

 

© Copyright 2009 Acnodes, Inc.

661 Brea Canyon Rd., Suite 3

All rights reserved. Product description and product specifications

Walnut, CA 91789

are subject to change without notice. For latest product information,

tel: 909.598.7388, fax: 909.598.0218

please visit Acnodes’ web site at www.acnodes.com.

Image 103
Contents RMC Copyright 2005 Acnodes, Inc Manual Organization PrefaceAdvanced Chassis Setup Advanced Motherboard SetupBios Table of Contents System Interface Installing the System in to a RackAdvanced Motherboard Setup NIC2 JLAN2 LED NIC1 JLAN1 LED Advanced Chassis Setup Bios Overview IntroductionMemory Motherboard FeaturesOther Features ProcessorRMC Control Panel Server Chassis FeaturesSystem Power Sata SubsystemUnpacking the System Choosing a Setup LocationPreparing for Setup OverviewServer Precautions Rack PrecautionsRack Mounting Considerations Identifying the Sections of the Rack Rails Installing the System into a RackInner Rails Installing the Rack RailsOuter Rails RMC Installing the Chassis into a Rack Installing the Server into a Telco Rack Removing the Chassis Cover Figure Checking the Motherboard SetupChecking the Components Checking the Airflow Checking the Drive Bay SetupProviding Power Checking the DrivesPower Reset ButtonControl Panel Buttons Universal Information LED Control Panel LEDsNIC2 Drive Carrier LEDs Electrical Safety Precautions System SafetyGeneral Safety Precautions ESD Precautions Operating Precautions Handling the Motherboard PrecautionsInstalling to the Chassis Serverboard InstallationUnpacking Connecting the Control Panel Connecting CablesConnecting Data Cables Connecting Power CablesI/O Ports Installing an LGA1366 Processor Installing the Processor and HeatsinkRMC Installing a Passive CPU Heatsink Removing the Heatsink Installing & Removing DIMMs Installing Memory ModulesMaximum Memory Possible Memory SupportPCI Expansion Cards Installing a PCI Expansion CardServerboard Details RMC Power Button Connector DefinitionsMain ATX Power Supply Connector Processor Power ConnectorPower On LED HDD LED/UID SwitchOverheat/Fan Fail/UID LED Serial Ports NMI ButtonFan Headers ATX PS/2 Keyboard and PS/2 Mouse PortsOverheat/Fan Fail LED Chassis IntrusionWake-On-LAN External Speaker/Internal BuzzerSgpio Headers Onboard Power LEDPower Supply SMBus Connector Universal Serial Bus USBUnit Identifier Button Power Supply Fail LED HeaderAlarm Reset ButtonCmos Clear Jumper SettingsVGA Enable/Disable Explanation of JumpersWatch Dog Enable/Disable LAN1/2 Enable/DisableUSB Wake-Up SMBus to PCI Slots BMC Enable/DisableSAS Enable/Disable SAS RAID Mode SelectIpmi Dedicated LAN LEDs Onboard IndicatorsOnboard Power LED LE1 LAN1/2 LEDsSAS Activity LED BMC Heartbeat LEDSAS Heartbeat LED SAS Ports Floppy ConnectorSata and Floppy Drive Connections Sata PortsDriver/Tool Installation Display Screen Installing SoftwareRMC RMC Tools Required Static-Sensitive DevicesSystem Cooling Control PanelSystem Fan Failure Adding a System FanReplacing a System Fan Figure Installing a Hard Drive into a Drive Carrier Figure Drive Bay Installation/RemovalAccessing the Drive Bays Hard Drive InstallationRemoving a Hard Drive Figure DVD Drive Installation Power Supply Failure Power SupplyRemoving/Replacing the Power Supply How To Change the Configuration Data Starting Bios Setup UtilityIntroduction Starting the Setup Utility Main SetupSystem Memory System Time/System DateAddOn ROM Display Mode Advanced Setup ConfigurationsXboot Features Quick Boot Quiet BootPS/2 Mouse Support Wait For F1 If ErrorPower Button Function Restore on AC Power LossClock Spread Spectrum Ratio Cmos SettingHardware Prefetcher Available when supported by the CPU XProcessor & Clock Options CPU RatioIntel Eist Technology Active Processor CoresTDC Limit Override Intel Turbo Boost Configuration Turbo Ratio Limit ProgramCore Ratio Limit ~ 3 Core Ratio LimitXAdvanced Chipset Control Memory Frequency Memory ModeTemperature Rise QPI L0s and L1Dimm Pitch High Performance Event TimerAir Flow AltitudeXide / Floppy Configuration LBA/Large Mode IDE Detect Timeout secType DMA Mode PIO ModeBlock Multi-Sector Transfer 32Bit Data Transfer A.R.T. For Hard disk drivesXPCI/PnP Configuration XRemote Access Configuration XSuper IO Device ConfigurationXHardware Health Configuration CPU Temperature System TemperatureUSB Device WakeUp Xacpi ConfigurationFan Speed Control Modes Fan1 ~ Fan 5 ReadingTPM Enable/Disable Status Headless ModeAcpi Version Features XTrusted Computing TCG/TPM Support Execute TPM CommandXipmi Configuration BMC Watch Dog Timer Action Set PEF ConfigurationMark all events as read XEvent Log ConfigurationBMC WatchDog TimeOut MinSec View Event LogChange Supervisor Password Security SettingsSupervisor Password User PasswordBoot Sector Virus Protection Change User PasswordXBoot Device Priority Boot SettingsXHard Disk Drives Save Changes and Exit Retry Boot DevicesExit Options XRemovable DrivesDiscard Changes Load Optimal DefaultsLoad Fail-Safe Defaults Discard Changes and ExitRecoverable Post Error Beep Codes Appendix a Post Error Beep CodesInstalling Windows on RAID Systems Appendix B Installing the Windows OSInstalling Windows on Non-RAID Systems SAS Controller ProcessorsChipset Memory CapacitySystem Cooling WeightPower Supply Chassis