Acnodes RMC 7182 Server Chassis Features, System Power, Sata Subsystem, Control Panel, Backplane

Page 14

RMC 7182

1U Rackmount System

1-3 Server Chassis Features

The following is a general outline of the main features of the RMC7182 chassis.

System Power

When configured as a Acnodes RMC7182, the embedded system chassis includes a single 560W power supply.

SATA Subsystem

For the RMC7182, the motherboard chassis was designed to support four SAS or SATA hard drives, which are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot- swap capability of the SAS drives (there is no system support for SATA drives).

Control Panel

The embedded system's control panel provides important system monitoring and control information. LEDs indicate power on, network activity, hard disk drive activ- ity and system overheat conditions. The control panel also includes a main power button and a system reset button. The front of the chas- sis also includes a COM port and two USB serial ports for easy access.

I/O Backplane

The SC113MTS-560C is a short-depth, 1U rackmount chassis. Its I/O backplane provides three PCI slots, one COM port (the other is internal), one VGA port, two USB ports, PS/2 mouse and keyboard ports, two Ethernet (LAN) ports and a UID LED.

Cooling System

The embedded system chassis' revolutionary cooling design has been optimized to provide sufficient cooling for dual CPU configurations. The chassis includes four

4-cm counter-rotating PWM (Pulse Width Modulated) fans located in the middle of the system. There is a "Fan Speed Control Mode" in BIOS that allows chassis fan speed to be determined by system temperature.

	© Copyright 2005 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 14

Contents RMC Copyright 2005 Acnodes, Inc Preface Manual OrganizationBios Advanced Motherboard SetupAdvanced Chassis Setup Table of Contents Installing the System in to a Rack System InterfaceAdvanced Motherboard Setup NIC2 JLAN2 LED NIC1 JLAN1 LED Advanced Chassis Setup Bios Introduction OverviewProcessor Motherboard FeaturesOther Features MemoryRMC Sata Subsystem Server Chassis FeaturesSystem Power Control PanelOverview Choosing a Setup LocationPreparing for Setup Unpacking the SystemRack Precautions Server PrecautionsRack Mounting Considerations Installing the System into a Rack Identifying the Sections of the Rack RailsInstalling the Rack Rails Inner RailsOuter Rails RMC Installing the Chassis into a Rack Installing the Server into a Telco Rack Checking the Components Checking the Motherboard SetupRemoving the Chassis Cover Figure Checking the Drives Checking the Drive Bay SetupProviding Power Checking the AirflowControl Panel Buttons Reset ButtonPower Control Panel LEDs Universal Information LEDNIC2 Drive Carrier LEDs System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Precautions Handling the MotherboardUnpacking Serverboard InstallationInstalling to the Chassis Connecting Power Cables Connecting CablesConnecting Data Cables Connecting the Control PanelI/O Ports Installing the Processor and Heatsink Installing an LGA1366 ProcessorRMC Installing a Passive CPU Heatsink Removing the Heatsink Installing Memory Modules Installing & Removing DIMMsMemory Support Maximum Memory PossibleInstalling a PCI Expansion Card PCI Expansion CardsServerboard Details RMC Processor Power Connector Connector DefinitionsMain ATX Power Supply Connector Power ButtonOverheat/Fan Fail/UID LED HDD LED/UID SwitchPower On LED ATX PS/2 Keyboard and PS/2 Mouse Ports NMI ButtonFan Headers Serial PortsExternal Speaker/Internal Buzzer Chassis IntrusionWake-On-LAN Overheat/Fan Fail LEDUniversal Serial Bus USB Onboard Power LEDPower Supply SMBus Connector Sgpio HeadersButton Power Supply Fail LED HeaderAlarm Reset Unit Identifier ButtonExplanation of Jumpers Jumper SettingsVGA Enable/Disable Cmos ClearUSB Wake-Up LAN1/2 Enable/DisableWatch Dog Enable/Disable SAS RAID Mode Select BMC Enable/DisableSAS Enable/Disable SMBus to PCI SlotsLAN1/2 LEDs Onboard IndicatorsOnboard Power LED LE1 Ipmi Dedicated LAN LEDsSAS Heartbeat LED BMC Heartbeat LEDSAS Activity LED Sata Ports Floppy ConnectorSata and Floppy Drive Connections SAS PortsInstalling Software Driver/Tool Installation Display ScreenRMC RMC Static-Sensitive Devices Tools RequiredControl Panel System CoolingReplacing a System Fan Figure Adding a System FanSystem Fan Failure Hard Drive Installation Drive Bay Installation/RemovalAccessing the Drive Bays Installing a Hard Drive into a Drive Carrier FigureRemoving a Hard Drive Figure DVD Drive Installation Power Supply Power Supply FailureRemoving/Replacing the Power Supply Introduction Starting Bios Setup UtilityHow To Change the Configuration Data Main Setup Starting the Setup UtilitySystem Time/System Date System MemoryQuiet Boot Advanced Setup ConfigurationsXboot Features Quick Boot AddOn ROM Display ModeRestore on AC Power Loss Wait For F1 If ErrorPower Button Function PS/2 Mouse SupportXProcessor & Clock Options CPU Ratio Ratio Cmos SettingHardware Prefetcher Available when supported by the CPU Clock Spread SpectrumActive Processor Cores Intel Eist Technology~ 3 Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit ProgramCore Ratio Limit TDC Limit OverrideXAdvanced Chipset Control QPI L0s and L1 Memory ModeTemperature Rise Memory FrequencyAltitude High Performance Event TimerAir Flow Dimm PitchXide / Floppy Configuration Type IDE Detect Timeout secLBA/Large Mode Block Multi-Sector Transfer PIO ModeDMA Mode A.R.T. For Hard disk drives 32Bit Data TransferXPCI/PnP Configuration XSuper IO Device Configuration XRemote Access ConfigurationXHardware Health Configuration System Temperature CPU TemperatureFan1 ~ Fan 5 Reading Xacpi ConfigurationFan Speed Control Modes USB Device WakeUpExecute TPM Command Headless ModeAcpi Version Features XTrusted Computing TCG/TPM Support TPM Enable/Disable StatusXipmi Configuration Set PEF Configuration BMC Watch Dog Timer ActionView Event Log XEvent Log ConfigurationBMC WatchDog TimeOut MinSec Mark all events as readUser Password Security SettingsSupervisor Password Change Supervisor PasswordChange User Password Boot Sector Virus ProtectionXHard Disk Drives Boot SettingsXBoot Device Priority XRemovable Drives Retry Boot DevicesExit Options Save Changes and ExitDiscard Changes and Exit Load Optimal DefaultsLoad Fail-Safe Defaults Discard ChangesAppendix a Post Error Beep Codes Recoverable Post Error Beep CodesAppendix B Installing the Windows OS Installing Windows on RAID SystemsInstalling Windows on Non-RAID Systems Memory Capacity ProcessorsChipset SAS ControllerChassis WeightPower Supply System Cooling