Acnodes RMC 7182 user manual Rmc

RMC 7182

1U Rackmount System

1.After removing the plastic cap, use your thumb and the index finger

to hold the CPU at the north and south center edges.

2.Align the CPU key (the semi-circle cutout) with the socket key (the notch below the gold color dot on the side of the socket).

3.Once the CPU and the socket are aligned, carefully lower the CPU straight down into the socket.

Do not rub the CPU against the surface of the socket or its pins to avoid damaging the CPU or the socket.

4.With the CPU in the socket, in- spect the

four corners of the CPU to make sure that it sits level and is properly installed.

5.Once the CPU is securely seated in the socket, lower the CPU load plate to the socket.

6.Use your thumb to gently push the socket clip down to the clip lock.

Important! Please save the plastic cap. The motherboard must be shipped with the plastic cap properly installed to protect the CPU socket pins. Shipment without the plastic cap properly installed may cause damage to the socket pins.

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.