Metrologic Instruments MS7620 manual Scanner and Accessories, Description

Page 5

SCANNER AND ACCESSORIES

BASIC KIT

Part #

Description

MS7600 Horizon™ Series Scanner

00-02407B MetroSelect® Programming Guide

00-02870B MS7600 Horizon Series Installation and User’s Guide

52-52511A

24” EAS cable

Guides also available for download at www.metrologic.com.

		OPTIONAL ACCESSORIES
Part #		Description

46-46640		Point of Sale (POS) USB Plug
54-54xxx*		Straight PowerLink Cable with built in power jack.
		Straight PowerLink Cable with built in power jack.
		2.1 m (7') cord with short strain relief
		2.1 m (7') cord with short strain relief

xxx* specifies connection to the host.

Contact a customer service representative for additional information.

54-54002 Keyboard Wedge PowerLink Cable with Adapter Cable

	MVC**	Metrologic Voltage Converter Cable,
	MVC**	+12VDC to +5.2VDC or -12VDC to +5.2VDC
		+12VDC to +5.2VDC or -12VDC to +5.2VDC

**Contact a Metrologic Customer Service representative for additional information on Metrologic’s MVC cable series and the host connections available.

54-54020 Stand Alone Keyboard Wedge PowerLink Cable

54-54667 RS232 AUX PowerLink Cable

Other items may be ordered for the specific protocol being used. To order additional items, contact the dealer, distributor or call Metrologic’s Customer Service Department at 1-800-ID-METRO or 1-800-436-3876.

2

Image 5

Contents MS7600 Horizon Series Installation and User’s Guide Page Table of Contents Introduction Description Scanner and AccessoriesReplacement Parts N OT Press Before Installing Your MS7600Package Flow Mounting the MS7600 SeriesOption B Free Hanging Support Option C Trim Ring Mlpn 46-46641, Additional Purchase Turn on the host system Installation for Keyboard Wedge InterfaceStand-Alone Keyboard Interface Installation for STAND-ALONE Keyboard InterfaceIf you require USB Point of Sale communication protocols Installation for USB InterfaceManufacturers Note RS232 or Light Pen Interface Installation for RS232 or Light PEN InterfacesFor RS232 Communication Scan 1st RS232/IBM, Interface Installation for IBM 46XX InterfaceOCIA, Interface Installation for Ocia InterfaceInstallation of a Secondary Scanner Enable AUX Output Connector Orientation Top Secondary Scanner Setup Bottom Scanner Parts O t p3, 4, 5, on SW1 & SW2 MaintenanceEAS Deactivation Antenna Label Locations Scanner LabelsThree Beeps on power up Audible IndicatorsOne Beep Razzberry ToneVisual Indicators Flashing Amber and One Razzberry Tone Failure ModesFlashing Red and Amber Two Razzberry Tones Continuous Razzberry Tone with both LEDs offChanging the Beeper Tone Changing the Beeper Tone & VolumePower Save Modes and IR Detection Power Save Modes and IR Detection Scan Volume in Plane Perpendicular to Flow Scan Volume SpecificationsMinimum Bar Code Element Width Depth of Field by Minimum BAR Code Element WidthAll Interfaces Troubleshooting GuideCodes. The scanner defaults to Keyboard Wedge Only RS-232 Only Aux port operation with any interface Design Specifications Electrical RS232 Demonstration Program Keyboard Country Type Applications and ProtocolsKeyboard Type IBM KBW USB Default SettingsDTS/SIEMENS DTS/NIXDORF NCR F NCR S Default Settings ACK/NAK Default Settings Default settings for Aux interface Scanner and Cable Terminations Scanner Pinout ConnectionsMS762x-37 Keyboard Wedge Stand-Keyboard or USB Cable Connector Configurations Host End Cable Connector Configuration Limited Warranty Atención AvertissementAttenzione AchtungPatents Light Pen IndexUSB Page August