Metrologic Instruments MS700i manual

Page 13

To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.

1.When connecting to a PS/2 computer,

attach to the com- munication cable (#51573) the 5M 6F adaptor to the female connector and the 5F 6M adaptor to the male connector.

2. If the PC is on, exit the application and turn the PC off.

Figure 1

3. Disconnect the keyboard from the PC.

4. Plug the communication cable to the PC and the keyboard. (Refer to Figure 1).

5. Connect the 25-pin D-type connector on the scanner’s head cable to the communication cable.

6. Check the AC input requirements of the transformer to make sure the voltage matches the AC outlet.

(A socket-outlet shall be installed near the equipment and shall be easily accessible.)

7. Plug the transformer into the side of the female D-type connector located on the communication cable. Plug the transformer into the AC outlet to supply power to the scanner.

8. Turn the PC on.

10

Image 13

Contents MS700i Series Laser Bar Code Projection Scanner Installation and User’s GuideTable of Contents Appendix B Appendix aAppendix C Appendix DIntroduction Unpacking List Scanner Connections to the Host Configuration of the Scanner to the Host System Cloning Cloning FeatureVersion 11 IBM 46XX Scanner Configuring the Scanner IBM 4684 and 4694 Systems Configuring the IBMPC Type Scanner Installation to a PC Keyboard PortPage PC Application Note Installation of the MS700 Series Stand Attaching the Scanner to the Stand Scanner performs a good read of a bar code MS700i and MS720i Series FeaturesNo Red or Green LED Visual IndicatorsNi la diode rouge, ni la diode verte nest allumée Signaux optiquesWeder rote noch grüne Leuchtdiodenanzeige Optische AnzeigenNé il diodo luminoso rosso né quello verde sono accesi Segnali otticiVolume Settings Labels InfraRed IR Object Sensor Symbol Orientation Active Scan Region for the MS700i and MS715i Scanner Active Scan Region for the MS720i Scanner Page Horizontal Scan Width vs. Distance for the MS720i Scanner Depth of Field for the MS700i and MS715i Scanner Code Density Code TypeMil /1000 Page Depth of Field for the MS720i Scanner Element Mil /1000 Code Type Minimum Small Code DensityPage Applications and Protocols MaintenanceScanner Version Identifier Communication Protocols Appendix a SpecificationsMechanical ElectricalEnvironmental OperationalAppendix B Default SettingsSweda Three Beeps on Timeout No Beeps on IR Timeout Baud Rate Parallel Light 46XX Parallel Light Pen 46XX 232 Pin Function Appendix CEOT Version 2 Pin Assignments for Parallel CommunicationVersion 26 Pin Assignments for Multi-drop RS-422 Versions 11 and 24 Pin Assignments for RS-485 Pin Function Appendix D Warranty and Disclaimer Limited WarrantyDisclaimer Remarque Appendix EAnmerkung Patents Appendix FLED IndexLaserklasse UL/CSA/TUV