Metrologic Instruments MS700i manual Installation of the MS700 Series Stand

Page 15

Installation of the MS700 Series Stand

The following are components used to build the MS700 Series stand (MLPN: 45483):

		Figure 2
1	Shoe Mount	4	Four Wood Screws
2	Stand Cover	5	One Machine (¼-20) Screw
3	Stand Base	6	Internal Lock Washer
		7	Flexible Shaft

1.Use the 2½ inch x 2½ inch stand base to mark the position for pilot holes.

2.Use the four wood screws to secure the base to the work surface.

3.Position the stand cover on top of the stand base.

4.Screw the flexible shaft to the stand base.

5.Place the internal lock washer on top of the flexible shaft and then screw the shoe to the shaft with the machine screw.

12

Image 15

Contents MS700i Series Laser Bar Code Projection Scanner Installation and User’s GuideTable of Contents Appendix D Appendix aAppendix B Appendix CIntroduction Unpacking List Scanner Connections to the Host Configuration of the Scanner to the Host System Cloning Cloning FeatureVersion 11 IBM 46XX Scanner Configuring the Scanner IBM 4684 and 4694 Systems Configuring the IBMPC Type Scanner Installation to a PC Keyboard PortPage PC Application Note Installation of the MS700 Series Stand Attaching the Scanner to the Stand Scanner performs a good read of a bar code MS700i and MS720i Series FeaturesNo Red or Green LED Visual IndicatorsNi la diode rouge, ni la diode verte nest allumée Signaux optiquesWeder rote noch grüne Leuchtdiodenanzeige Optische AnzeigenNé il diodo luminoso rosso né quello verde sono accesi Segnali otticiVolume Settings Labels InfraRed IR Object Sensor Symbol Orientation Active Scan Region for the MS700i and MS715i Scanner Active Scan Region for the MS720i Scanner Page Horizontal Scan Width vs. Distance for the MS720i Scanner Depth of Field for the MS700i and MS715i Scanner Code Type Code DensityMil /1000 Page Depth of Field for the MS720i Scanner Element Mil /1000 Code Type Minimum Small Code DensityPage Maintenance Applications and ProtocolsScanner Version Identifier Communication Protocols Electrical SpecificationsAppendix a MechanicalEnvironmental OperationalAppendix B Default SettingsSweda Three Beeps on Timeout No Beeps on IR Timeout Baud Rate Parallel Light 46XX Parallel Light Pen 46XX 232 Pin Function Appendix CEOT Version 2 Pin Assignments for Parallel CommunicationVersion 26 Pin Assignments for Multi-drop RS-422 Versions 11 and 24 Pin Assignments for RS-485 Pin Function Appendix D Warranty and Disclaimer Limited WarrantyDisclaimer Remarque Appendix EAnmerkung Patents Appendix FLED IndexLaserklasse UL/CSA/TUV