Siemens eWON4002 manual Markings, Applicable directives, standards and compliance, Serial number

Page 9

eWON4002™

Installation Guide

ver 2 . 04

3.2 Markings

The identification label of the eWON® stands on the left hand side of the housing. The label is composed of the following fields:

Serial number

0504 = year+week

0001 = sequential number

89 = suffix eWON4002™

COM type

../33.6 = PSTN modem at

33.6 kb

../GPRS = GSM modem

(GPRS compatible)

Required power supply

The power supply must be limited to max 300mA and be SELV-compliant (safety voltage)

Figure 3: eWON® Label

The eWON® Serial Number (SN) is an important traceability tool for both the user and the manufacturer. Therefore, next to the product label, each eWON® has its serial number stored in the flash memory. This SN is also used in order to scan the network for eWONs® and to assign its IP address, subnet mask and gateway. For more details, See “Equipment information and versions” on page 7.

3.3Applicable directives, standards and compliance

•93/68/EEC European directive for CE-mark

•73/23/EEC European directive for the safety of low voltage equipment (LVD) – Applicable standard is EN60950 A1+A4+A11

•89/336/EEC amended by 92/31/EEC European directives for the electromagnetic compatibility (EMC) – Applicable standards EN55022:94 A1, A2 (emissions) and EN55024:98 (immunity)

•UL/CSA certification in progess (UL60950)

page 6 of 35

Image 9

Contents Installation Guide EWON4002 Installation Guide Table Of Contents IP parameters configuration Technical support Product description General specification of the hardware platformIntroduction Ethernet GatewayDatalogger RAS Modem & PIRTypical applications Part Numbers and internal optionsCc= Communication External accessoriesXy = Options Type/Description Part NumberStructure of the eWON technical documentation Level Title ContentsHousing Housing and markingsMarkings Required power supplyApplicable directives, standards and compliance Serial numberMechanical outline Equipment information and versionsSpring Bottom Slider Mounting and environmental conditionsSpecifications for external power supply selection Preparing the installationSpecification Value Auto fuseFront panel control LEDs Embedded Pstn Modem Communication interfaces and I/OsEmbedded GSM/GPRS Modem Ethernet PortSIM-card insertion Recommendations for the GSM/GPRS antennaSerial port Dip switch Serial portsSerial port #1 Serial port #2 Positions ModeSerial port #3 Serial port 3 connector and dip switchDigital Inputs Open collector Digital Output Digital OutputsConfigurable standard Analog Inputs AI1 AI4 Analog InputsRelays Resistive Temperature Detector Inputs By Ethernet Communicating with the eWONBy phone line or GSM Under Windows 98, NTUnder Windows XP EWONCFG utility and IP parameter window IP parameters configurationUser Reset ResetsFactory Reset Technical supportPower supply Connector Appendix Pinouts and connections Power SupplyEthernet Ethernet ConnectorDirect connection Crossed CableHub/Router Straight Cable Connection over hub/routerRJ 45 connector/cabling RJ45 connectorDigital Input/Output Connector 1 DI / do connectorDigital Input/Output mating female connector included Digital Input/Output connector pinout Pin DescriptionAnalog Input mating female connector included Analog Input ConnectorAnalog Input connector pinout Pin Description Analog InputRelays Output mating female connector included Relay ConnectorRelays output connector pinout Pin Description Relays outputTop face Digital inputBack face Front Face Digital InputSerial ports connectors Female DB9 with 4/40 blocking screws Pinout serial port Pinout serial ports 1 and 3 according to modePin RS232 RS485 RS422 Pin RS232Connector MiniDIN PIN Schneider Signal EWON Signal Name EWON SUBDB9Unitelway/Modbus serial cable DA is connected to B- and DB is connected to A+Pstn phone line connector Pstn phone line ConnectorPstn phone line mating male connector not included